Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.mira.net.au!news.vbc.net!vbcnet-west!knews.uk0.vbc.net!vbcnet-gb!azure.xara.net!xara.net!news.maxwell.syr.edu!news-peer.sprintlink.net!news.sprintlink.net!Sprint!news-peer.gsl.net!uwm.edu!miller.cs.uwm.edu!bacon From: bacon@cs.uwm.edu (Jason Bacon) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Serial port wiring Date: 26 May 1997 15:51:26 GMT Organization: University of Wisconsin - Milwaukee Lines: 13 Message-ID: <5mcbhu$m0s@uwm.edu> NNTP-Posting-Host: 129.89.139.22 X-Newsreader: TIN [version 1.2 PL2] Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:41627 Hi folks, Does anyone know how to disable hardware flow control on a serial line used for logins? ( Using the standard sio driver on 2.1.7 ) I'd like to connect a terminal using some DB25/RJ11 connectors, which are limited to 4 wires, but getty doesn't respond unless CTS/RTS are connected. I can't find anything in the getty or sio docs, so any pointers would be appreciated. TIA, -Jason