Return to BSD News archive
Received: by minnie.vk1xwt.ampr.org with NNTP id AA5838 ; Fri, 01 Jan 93 01:57:33 EST Xref: sserve comp.unix.bsd:9543 comp.unix.bsd:9544 Newsgroups: comp.unix.bsd,comp.unix.bsd Path: sserve!manuel.anu.edu.au!munnari.oz.au!spool.mu.edu!umn.edu!csus.edu!netcom.com!rpaul From: rpaul@netcom.com (Raymond E. Paul) Subject: [386bsd] Cannot boot TinyBsd - Help. Message-ID: <1993Jan2.074423.24178@netcom.com> Followup-To: comp.unix.bsd Keywords: 386bsd, TinyBsd Organization: Netcom - Online Communication Services (408 241-9760 guest) Date: Sat, 2 Jan 1993 07:44:23 GMT Lines: 36 I have the following system configuration and I have been unable to successfully boot from the TinyBsd floppy. I retreived this floppy from agate.berkeley.edu around 12/92 and have verified that it works fine on various other systems. 386/486/387: Utron 386/40MHz AMI Bios ISA/EISA/SCSI: ISA RAM size: 4 Meg drive(s) type and size: Quantum LPS-120 256K cache tape(s) type and size: Colorado 250 MB ethernet type: none graphics type: EGA / ATI EgaWonder (very old - 5yrs or more) serial type: 2 serial ports on IDE disk controller parallel type: 1 parallel port on IDE disk controller other: USRobotics 14400/PC FAX Modem After the system reads the drive for about 30 seconds I get the following error message: trap type 19 code = 0 eip = fe00076c cs=8 eflags = 3002 cr2 0 cpl ffffffff panic: trap hit reset please I have tried changing the AMI BIOS configuration so that shadow ram and caching are disabled. I have also removed the modem from the system. So far everything I've tried has been to no avail. Any help would be greatly appreciated. In particular, does anyone out there have experience with the same motherboard? Is there any useful information that can be gleaned from the error message. (I know what the registers and flags mean, more or less, I just don't know what to do about it). Where do I go from here? -- Raymond E. Paul rpaul@netcom.com