Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.Hawaii.Edu!news.caldera.com!enews.sgi.com!news.mathworks.com!newsfeed.internetmci.com!barracuda.pelican.net!not-for-mail From: Stephen C. West-Fisher <steve@pelican.net> Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: Freeze after reboot with 2940U (2.2.1-R) Date: 2 Apr 1997 13:20:17 GMT Organization: Pelican Net Lines: 20 Message-ID: <5htmeh$jdi$1@barracuda.pelican.net> References: 5hdh6a$rcq@cascade.cs.ubc.ca> <333C5E68.7C88@gamespot.com> NNTP-Posting-Host: mullet.pelican.net X-Newsreader: NCSA Mosaic Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:38293 I Ian Kallen writes: > I think it's a bug in the 2940U firmware. I never had any problems with > 2940's until using the "U" flavored cards. Did yours work before > installing FreeBSD 2.2.1? > > > Markus Meister wrote: > > > > After running FreeBSD 2.2.1-RELEASE I can't reboot without > > removing power from the system; if I don't, then during the initial > > detection of my SCSI controller, an Adaptec 2940U, there is a complete > > freeze. > > Markus I have the same problem with one of my systems with a 2940A. Another system works just fine. The workaround I've found is to enable SCAM on the adaptec controller. Steve steve@pelican.net