Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.mel.connect.com.au!munnari.OZ.AU!news.ecn.uoknor.edu!feed1.news.erols.com!howland.erols.net!EU.net!newsfeed.internetmci.com!news.dti.ad.jp!news-jp-0.abone.net!np1.iij.ad.jp!nf0.iij.ad.jp!nr1.iij.ad.jp!news.iij.ad.jp!iijnet!tom!usenet From: nao@tom-yam.or.jp (HAMADA Naoki) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: 3c905 Full-Duplex ? Date: 30 Mar 1997 23:49:59 GMT Organization: Tom Yam, Edogawa, JAPAN Lines: 16 Message-ID: <NAO.97Mar31084959@miffy.tom-yam.or.jp> References: <01bc3cb7$72c276c0$214f96cd@reality> NNTP-Posting-Host: miffy.tom-yam.or.jp In-reply-to: "Kurt Schafer"'s message of 30 Mar 1997 03:05:58 GMT Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:38089 In article <01bc3cb7$72c276c0$214f96cd@reality> "Kurt Schafer" <kschafer@cyberbeach.net> writes: >Is the 3C905 PCI network card supported in Full-Duplex mode by FreeBSD >2.2.1 ? Not yet. If someone send two 3C905 network cards and a full-duplex hub, it will be implemented in a few days :-) Setting `fullDuplexEnable' bit (0x0040 of MacControl Register, i.e. offset 6 of window 3) must enable it. TxReset and RxReset should be issued after changing this bit. Note that if you set this bit with a dumb repeating hub, you may be involved in network problems. -nao