Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!news.wildstar.net!news.ececs.uc.edu!news.kei.com!news.thenet.net!uunet!in3.uu.net!129.115.10.31!naiad.utsa.edu!uthscsa.edu!nntp.crl.com!usenet From: "Jordan K. Hubbard" <jkh@FreeBSD.org> Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: Freeze after reboot with 2940U (2.2.1-R) Date: Sun, 30 Mar 1997 01:37:33 -0800 Organization: Walnut Creek CDROM Lines: 14 Message-ID: <333E345D.FF6D5DF@FreeBSD.org> References: <5hdh6a$rcq@cascade.cs.ubc.ca> NNTP-Posting-Host: time.cdrom.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 3.01 (X11; I; FreeBSD 2.2-STABLE i386) To: Markus Meister <meister@cs.ubc.ca> Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:38050 Markus Meister wrote: > After running FreeBSD 2.2.1-RELEASE I can't reboot without > removing power from the system; if I don't, then during the initial > detection of my SCSI controller, an Adaptec 2940U, there is a complete I had that happen once with an Adaptec card, but it was broken. Once I replaced it, my problems went away. I also have about 4 systems here with 2940U and 2940UW controllers in them, all running 2.2.1, and I don't see the same symptoms at all. Curious. -- - Jordan Hubbard FreeBSD core team / Walnut Creek CDROM.