Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!msunews!agate!spool.mu.edu!news.sgi.com!news.maxwell.syr.edu!news-feed.inet.tele.dk!sn.no!uninett.no!news.uni-c.dk!news-inn.uni-c.dk!news.uni-c.dk!guldager.uni-c.dk!not-for-mail From: unimgj@guldager.uni-c.dk (Morten Guldager Jensen) Newsgroups: comp.unix.bsd.bsdi.misc Subject: Re: 100Mb Cards Date: 11 Mar 1997 14:18:26 GMT Organization: News Server at UNI-C, Danish Computing Centre for Research and Education. Lines: 21 Message-ID: <5g3pji$3ho$1@news.uni-c.dk> References: <01bc29de$c0ca6760$6f1d11cb@jan.bekkers.com.au> NNTP-Posting-Host: guldager.uni-c.dk X-Newsreader: TIN [UNIX 1.3 950824BETA PL0] Xref: euryale.cc.adfa.oz.au comp.unix.bsd.bsdi.misc:6311 Jan Hurst (jhurst@westway.net) wrote: : Hi all, : : I have been trying desperately to get our DEC 10/100mb cards (sorry but I : forget the model number) to run under BSDi 2.1. Everything runs nice and : happily during boot until the card driver is loaded, then the card simpy : resets and loses link status. The machine sees the card and allows you to : bind/ifconfig to it but nothing goes in or out. I have seen the same on SMC EtherPower 10/100 cards. The EtherPower's are based on a DEC500 chip. /Morten %-) -- -------------------------------------------------------------- Morten.Guldager.Jensen@uni-c.dk UNI-C Denmark. +45 3587 8935 -------------------------------------------------------------- * Linux is FREE, and if you don't like it YOU can CHANGE it. *