Return to BSD News archive
Path: sserve!manuel.anu.edu.au!munnari.oz.au!news.hawaii.edu!ames!olivea!spool.mu.edu!umn.edu!csus.edu!netcom.com!alm From: alm@netcom.com (Andrew Moore) Newsgroups: comp.unix.bsd Subject: Re: [386bsd] 16550 and rtscts patch Message-ID: <1992Dec15.002944.11215@netcom.com> Date: 15 Dec 92 00:29:44 GMT References: <Bz25Io.L40@ucunix.san.uc.edu> <1992Dec14.171834.7500@fcom.cc.utah.edu> Organization: Netcom - Online Communication Services (408 241-9760 guest) Lines: 18 In article <1992Dec14.171834.7500@fcom.cc.utah.edu> terry@cs.weber.edu (A Wizard of Earth C) writes: >In article <Bz25Io.L40@ucunix.san.uc.edu> pmartin@eniac.san.uc.edu (Paul Martin) writes: >> >>I applied the rtscts flow control patch to the com driver that was >>posted here sometime back. Now I cannot send anything to the modem. The >>modem does not receive the characters, and the command: >>echo ats0=1 > /dev/com2 >>seems to hang until I shut off the modem. This worked before the patch. >>I am using 16550's. By the way, the mouse on com1 still works fine. >> >>Any Ideas? > >I haven't had a chance to look at the patch yet (I did save it off); I thought Chris Demetriou mentioned that there were some additional changes needed to make this patch work (?) Anyhow, it is incorported into his multiport serial driver and works fine. -Andrew Moore <alm@netcom.com>