*BSD News Article 88610


Return to BSD News archive

Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.mel.connect.com.au!news.mel.aone.net.au!grumpy.fl.net.au!news.webspan.net!newsfeeds.sol.net!hunter.premier.net!news.mathworks.com!news.bbnplanet.com!cam-news-hub1.bbnplanet.com!cam-news-feed2.bbnplanet.com!ray.com!news.ray.com!news.res.ray.com!swlnews.msd.ray.com!not-for-mail
From: wag@swl.msd.ray.com (Bill Gianopoulos)
Newsgroups: comp.unix.bsd.freebsd.misc
Subject: ATAPI CD-ROM not recognized by probe on boot
Date: 6 Feb 1997 14:19:59 -0500
Organization: Raytheon Company
Lines: 32
Message-ID: <5ddasv$n18@swlrd2.msd.ray.com>
NNTP-Posting-Host: swlrd2.msd.ray.com
Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:35154

I have 2 completely different systems running FreeBSD which do not
recognize the CD-ROM drive at boot up using the install floppies.  When I
say different, I mean different manufactureres CD-ROM drives, different
manufactureres IDE controllers, different manufactureres motherboards,
different BIOS manufacturers, etc. etc.

They both fail to recognize the CD-ROM drive with 2.1, 2.1.5 and 2.1.6.
They both WILL properly recognize the CD-ROM if I build a kernel without
the wd2 and wd3 devices defined.

I suspect this may have something to do with other peoples ATAPI CD-ROM
probe problems.  Evidently probing for the non-existant hard-drives on
the controller screws up either the CD-ROM drive or the IDE controller
(I'm not sure which) such that the probe for the CD-ROM drive fails.

I think 2 things are needed here:

1.  After a failed probe for an IDE device, the controller should be reset.

2.  It should be possible to disable the wd devices from probing at boot
    time.

I think if this is done, many peoples problems could be solved.

I have not had a chance to try the 2.2-GAMMA boot floppy yet.  I
apologize if this is already addressed in 2.2.

-- 
William A. Gianopoulos; Raytheon Company
gianowa@eo.ray.com
--------------------------------------------------------
This is my personal opinion and not that of my employer.