Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!feed1.news.erols.com!howland.erols.net!rill.news.pipex.net!pipex!netcom.net.uk!peernews.ftech.net!telehouse1.frontier-networks.co.uk!Aladdin!aladdin.net!ns2.aladdin.net!i-exchange!news-sender.satin.net!news3.satin.net!eros.clara.net!news From: steve@clara.net (Steve Rawlinson) Newsgroups: comp.unix.bsd.bsdi.misc Subject: bsd/os 2.1 & adaptec 2940UW Date: Mon, 03 Feb 1997 21:42:04 GMT Lines: 12 Message-ID: <5d5lrq$q7j@eros.clara.net> NNTP-Posting-Host: achilles.clara.net X-Newsreader: Forte Free Agent 1.0.82 Xref: euryale.cc.adfa.oz.au comp.unix.bsd.bsdi.misc:5852 Using BSD/OS 2.1 and the 2940UW I dont seem to be able to get the kernel to report anything faster than 10M/s at boot. I have enabled UW in the scsi bios, disconnected the cdrom on the advice of a previous post, and have applied the kernel patch from bsdi which apparently introduces support for the features of the scsi card. Is there anything else I need to do? And should I expect ultra or wide modes to work, or both? steve