Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.cs.su.oz.au!metro!metro!asstdc.scgt.oz.au!nsw.news.telstra.net!act.news.telstra.net!psgrain!iafrica.com!pipex-sa.net!hole.news.pipex.net!pipex!bowl.news.pipex.net!pipex!tank.news.pipex.net!pipex!news.sprintlink.net!news-peer.sprintlink.net!arclight.uoregon.edu!hammer.uoregon.edu!news.uoregon.edu!news.acsu.buffalo.edu!news.drenet.dnd.ca!crc-news.doc.ca!nott!bcarh189.bnr.ca!bmerhc5e.bnr.ca!news From: Andrew Atrens <atrens@nortel.ca> Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: ATAPI CDROM Help needed: "atapi0.1: unknown phase" Date: Mon, 28 Oct 1996 16:40:31 -0500 Organization: Nortel Technology (formerly Bell Northern Research) Lines: 27 Message-ID: <3275284F.46D8@nortel.ca> References: <550cf7$9ka@umcc.umcc.umich.edu> NNTP-Posting-Host: bmerh278.bnr.ca Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 3.0 (X11; I; HP-UX A.09.05 9000/712) Kelvin Li wrote: > > I'm still having trouble getting my IDE CDROM to become a device that I > can mount. Does anyone know what I need to do when I get this message on > startup? > > wdc0: unit 1 (atapi): <NEC CD-ROM DRIVE:282/3.04>, removable, dma, iordy > atapi0.1: unknown phase > I've got a NEC 4X atapi drive and it works quite well under the 2.2 SNAP release, to be honest I haven't tried it with 2.1.5. In your kernel config file, make sure you've disabled wd1 ( second hard disk, first IDE controller ) or it will fight with the wcd0 driver for control of the CDROM: # comment me out! # disk wd1 at wdc0 drive 1 Hope this helps, Andrew Atrens, ( opinions mine, not Nortel's )