Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.rmit.EDU.AU!news.unimelb.EDU.AU!cs.mu.OZ.AU!munnari.OZ.AU!news.ecn.uoknor.edu!news.wildstar.net!serv.hinet.net!news.cc.nctu.edu.tw!spring.edu.tw!howland.erols.net!news.mathworks.com!newsfeed.internetmci.com!news.stealth.net!newsfeed.uk.ibm.net!news-m01.ny.us.ibm.net!ausnews.austin.ibm.com!usenet From: Tushar Patel <tpatel@austin.ibm.com> Newsgroups: comp.unix.bsd.freebsd.misc Subject: SCSI CD ROM problem ... Date: Wed, 02 Oct 1996 19:42:23 +0000 Organization: IBM Austin Lines: 39 Message-ID: <3252C59F.446B@austin.ibm.com> NNTP-Posting-Host: spur07.austin.ibm.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 3.0 (X11; I; AIX 2) CC: tpatel@ecpi.com Hi, I am trying to install 2.1.5 on the following system AUSU's mother board, 64MB RAM and 166Mhz PCI-SC200 Fast SCSI Card Seagate SCSI-2 hardrive I am connecting panasonic 2x SCSI-2 CDROM to the SC200 SCSI card. and I am getting folloing message : AT the boot time it recognize the drive and gives following message: (ncr0:5:0) "MATSHITA KME CD-ROM01 1.14" type 5 removable SCSI 2 cd0(ncr0:5:0) CD-ROM cd0(ncr0:5:0) asynchronous And when the installation starts I see message like: DEBUG mounted freeBSD CDROM on device /dev/cd0a as /cdrom (I see the CD spinning too) then I get following error message: ncr0:5 error (80:4) (8-0-0) (e0/13) @ (6e4:72340000) stript cmd=800c0000 reg: da 00 80 13 47 e0 05 ....... ncr0: restart (ncr dead?) I used the same card to install DOS system on the hardrive. I have used the same CDROM to install few things with my 2.0.5 freeBSD system. Q-1. What does the error indicate? Q-2. Is it possible that I may have bad SCSI-2 cable? Any suggestions to solve this problem? Thanks for the help. Tushar