Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.mel.connect.com.au!munnari.OZ.AU!spool.mu.edu!uwm.edu!cs.utexas.edu!news.sprintlink.net!news-peer.sprintlink.net!newsfeed.internetmci.com!realtime.net!ecpi.com!tushar From: tushar@ecpi.com (Tushar Patel) Newsgroups: comp.unix.bsd.freebsd.misc Subject: 2.1.5 install problem... Date: 1 Oct 1996 05:57:24 GMT Organization: Real/Time Communications Internet customer posting Lines: 38 Message-ID: <52qbs4$cgo@news3.realtime.net> NNTP-Posting-Host: ecpi.com X-RTcode: 5da19e9732c4a290df50b262 X-Newsreader: TIN [version 1.2 PL2] Hi, I am trying to install 2.1.5 on the following system AUSU's mother board, 64MB RAM and 166Mhz PCI-SC200 Fast SCSI Card Seagate SCSI-2 hardrive I am connecting panasonic 2x SCSI-2 CDROM to the SC200 SCSI card. and I am getting folloing message : AT the boot time it recognize the drive and gives following message: (ncr0:5:0) "MATSHITA KME CD-ROM01 1.14" type 5 removable SCSI 2 cd0(ncr0:5:0) CD-ROM cd0(ncr0:5:0) asynchronous And when the installation starts I see message like: DEBUG mounted freeBSD CDROM on device /dev/cd0a as /cdrom (I see the disk spinning too) then I get following error message: ncr0:5 error (80:4) (8-0-0) (e0/13) @ (6e4:72340000) stript cmd=800c0000 reg: da 00 80 13 47 e0 05 ....... ncr0: restart (ncr dead?) I used the same card to install DOS system on the hardrive. I have used the same CDROM to install few things with my 2.0.5 freeBSD system. Q-1. What does the error indicate? Q-2. Is it possible that I may have bad SCSI-2 cable? Any suggestions to solve this problem? Thanks for the help. Tushar