Return to BSD News archive
#! rnews 1947 bsd Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!news.wildstar.net!cancer.vividnet.com!hunter.premier.net!news.mathworks.com!newsfeed.internetmci.com!in3.uu.net!news.ime.net!not-for-mail From: brent@ime.net (Brent) Newsgroups: comp.unix.bsd.bsdi.misc Subject: Re: IP subnet Date: 25 Aug 1996 03:20:18 GMT Organization: Internet Maine Inc. Lines: 37 Message-ID: <4vogpj$n7g@news.ime.net> References: <3219F15C.12DB@jmtech.com> NNTP-Posting-Host: ime.net X-Newsreader: TIN [UNIX 1.3 950824BETA PL0] Aside from it being a subnet, you actually have two different class C blocks here. There's no way without some serious hacking (and then I don't know how stable it'd be) that you are going to run two Class C's in one ethernet. Why don't you just use a smaller subnet mask on One class C so you have less subnets but more hosts on the network? Tom (tom@jmtech.com) wrote: : Hi there, : I am hoping someone can help me on routing of BSDI2.1 : I am trying to subnet a Class C IP set to our local network using : BSDI2.1 as the gatway. : : I have chosen an IP range: eg. 205.10.5.97 - 205.10.5.126 subnet mask : 255.255.255.224 and I am trying to set the routing table on BSDI2.1 so : that it will act for this subnet's gateway. I choose the gateway IP for : the subnet to be 205.10.5.126 and the BSDI box IP address is : 205.10.8.254. Now there is the problem : How can I make the BSDI to advertise both IP address (205.10.8.254 & : 205.10.5.126) on the same ethernet address? (am I wrong ?) : I have tried : : ifconfig and route add command with no success. : Any suggestion is appreciated. : : Tom -- ------------------------ Internet Maine ISP -------------------------- info@ime.net 207-780-0416 voice http://www.ime.net 207-879-1416 fax ------------------------ Fixed Rate Access --------------------------