Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!spool.mu.edu!howland.reston.ans.net!nntp.coast.net!zombie.ncsc.mil!news.mathworks.com!newsfeed.internetmci.com!news.albany.net!news.sover.net!news.sprintlink.net!news-pen-4.sprintlink.net!news.voicenet.com!omni2.voicenet.com!not-for-mail From: melody@voicenet.com (Melody) Newsgroups: comp.unix.bsd.netbsd.misc Subject: Installing NetBSD-1.1 on a Sun 3/60. Need help Date: 29 Jul 1996 15:20:41 -0400 Organization: VoiceNet Internet Access Lines: 35 Message-ID: <4tj2u9$430@omni2.voicenet.com> NNTP-Posting-Host: omni2.voicenet.com Hi. I'm trying to install NetBSD on a Sun 3/60. I'm attempting to install the machine off of QIC-24 tapes built on a Sol2.5 machine using an Archive Viper (I believe) 150MB SCSI tape drive. When I tell the machine to boot of of the tape, I get a large number of select errors, which, as far as I know, means that it was unable to find the correct device. All I wanted to try to do is make sure the boot tapes were good. :) (There is no HD connected yet) Does anyone have any suggestions? The specifics of the box are: Sun 3/60 8 MB Ram. Rev 1.5 ROM The screen looks like: >b st() scsi: select failed scsi: select failed scsi: select failed scsi: select failed stopen: cannot get sense Device not found > Thanks in advanced. :) Melody -- Melody Lynn Yoon Systems Administration melody@voicenet.com "Our children know everything... We have cable." -- Charles in Charge Member of Team Internet Paintball -- I just forget my ID # PGP Key: finger -l melody@voicenet.com