Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.bhp.com.au!mel.dit.csiro.au!munnari.OZ.AU!news.hawaii.edu!ames!agate!howland.reston.ans.net!newsfeed.internetmci.com!news.mathworks.com!fu-berlin.de!zrz.TU-Berlin.DE!zib-berlin.de!news.tu-chemnitz.de!irz401!uriah.heep!news From: j@uriah.heep.sax.de (J Wunsch) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: 2.1.0 find Adaptec 1740, but not my drives Date: 27 Jan 1996 20:53:15 GMT Organization: Private BSD site, Dresden Lines: 19 Message-ID: <4ee3br$np9@uriah.heep.sax.de> References: <4e45sm$db4@news.iastate.edu> Reply-To: joerg_wunsch@uriah.heep.sax.de (Joerg Wunsch) NNTP-Posting-Host: localhost.heep.sax.de Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit X-Newsreader: knews 0.9.3 shad@iastate.edu (Marcus I. Ryan) writes: > ahb0: reading board settings, int=11 > ahb0: at 0x6000-0x60ff irq 11 on eisa slot 6 > ahb0: waiting for SCSI devices to settle... > (I think that's all - as has been pointed out, the pause button > doesn't pause it, so it's hard to read the last few devices). Once sysinstall has been starting, hit ScrollLock, and then the PageUp key to go through the messages again. Boot with option -v, perhaps you might find some hint from the driver. -- cheers, J"org joerg_wunsch@uriah.heep.sax.de -- http://www.sax.de/~joerg/ -- NIC: JW11-RIPE Never trust an operating system you don't have sources for. ;-)