Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.mel.connect.com.au!munnari.OZ.AU!news.ecn.uoknor.edu!news.cis.okstate.edu!news.ksu.ksu.edu!lazrus.cca.rockwell.com!cacd.rockwell.com!news-feed-1.peachnet.edu!gatech!newsfeed.internetmci.com!howland.reston.ans.net!usc!news.cerf.net!ccnet.com!usenet From: gbernard@dbc.com (Greg Bernard) Newsgroups: comp.unix.bsd.freebsd.misc Subject: freebsd 2.0.5 and intel etherexpress Date: Thu, 18 Jan 1996 18:14:09 GMT Organization: CCnet Communications (510-988-7140 guest) Lines: 140 Message-ID: <4dm2vj$1j4@ccnet2.ccnet.com> NNTP-Posting-Host: 199.217.9.49 Hi all, First off, sorry for the long post, but I am hoping that by including part of the message file that it will provide more clues. OK, I have a 100 MHz Pentium w/ 2 disk drives, first one being DOS/Windoze, and the second is FreeBSD 2.0.5. I can boot either system, and from Windoze I can connect this machine (dopey) to a Linux server (bashful) on my 2 computer network. However, when I reboot to FreeBSD, this is not the case. When I boot FreeBSD, it finds the card OK, but if I try to 'attach' the card via config, I get nothing (sorry, no output). If I 'probe' the card, it will page fault and I have to hit the reset button. Ie: fatal trap 12:page fault while in kernel mode fault vertual address =0x0 fault code =supervisor read,page not present The only thing I can think of is that the card is a ISA card in a PCI system. I have tried to clear out a 32K area starting at 0xD0000 under setup when the system boots, but this changes nothing. Any ideas anyone? Thanks, gb messages follows: Jan 17 21:34:44 dopey /kernel: FreeBSD 2.0.5-RELEASE #0: Sat Jun 10 10:46:56 1995 Jan 17 21:34:44 dopey /kernel: jkh@westhill.cdrom.com:/usr/src/sys/compile/GENERIC Jan 17 21:34:44 dopey /kernel: CPU: 100-MHz Pentium 815\100 (Pentium-class CPU) Jan 17 21:34:44 dopey /kernel: Origin = "GenuineIntel" Id = 0x525 Stepping=5 Jan 17 21:34:45 dopey /kernel: Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC> Jan 17 21:34:45 dopey /kernel: real memory = 33161216 (8096 pages) Jan 17 21:34:45 dopey /kernel: avail memory = 30654464 (7484 pages) Jan 17 21:34:46 dopey /kernel: Probing for devices on the ISA bus: Jan 17 21:34:46 dopey /kernel: sc0 at 0x60-0x6f irq 1 on motherboard Jan 17 21:34:46 dopey /kernel: sc0: VGA color <16 virtual consoles, flags=0x0> Jan 17 21:34:47 dopey /kernel: ed0: disabled, not probed. Jan 17 21:34:47 dopey /kernel: ed1: disabled, not probed. Jan 17 21:34:47 dopey /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa Jan 17 21:34:47 dopey /kernel: sio0: type 16550A Jan 17 21:34:47 dopey /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa Jan 17 21:34:47 dopey /kernel: sio1: type 16550A Jan 17 21:34:47 dopey /kernel: sio2 at 0x3e8-0x3ef irq 5 on isa Jan 17 21:34:48 dopey /kernel: sio2: type 16550A Jan 17 21:34:48 dopey /kernel: sio3 not found at 0x2e8 Jan 17 21:34:48 dopey /kernel: lpt0 at 0x378-0x37f irq 7 on isa Jan 17 21:34:49 dopey /kernel: lpt0: Interrupt-driven port Jan 17 21:34:49 dopey /kernel: lp0: TCP/IP capable interface Jan 17 21:34:49 dopey /kernel: lpt1: disabled, not probed. Jan 17 21:34:49 dopey /kernel: lpt2: disabled, not probed. Jan 17 21:34:50 dopey /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Jan 17 21:34:50 dopey /kernel: fdc0: NEC 72065B Jan 17 21:34:50 dopey /kernel: fd0: 1.44MB 3.5in Jan 17 21:34:51 dopey /kernel: fd1: 1.2MB 5.25in Jan 17 21:34:51 dopey /kernel: wdc0 at 0x1f0-0x1f7 irq 14 on isa Jan 17 21:34:51 dopey /kernel: wdc0: unit 0 (wd0): <QUANTUM LPS540A> Jan 17 21:34:52 dopey /kernel: wd0: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S Jan 17 21:34:52 dopey /kernel: wdc0: unit 1 (wd1): <QUANTUM LP120A GM120A01X> Jan 17 21:34:52 dopey /kernel: wd1: 116MB (238765 sectors), 901 cyls, 5 heads, 53 S/T, 512 B/S Jan 17 21:34:52 dopey /kernel: wdc1 not found at 0x170 Jan 17 21:34:52 dopey /kernel: bt0: disabled, not probed. Jan 17 21:34:52 dopey /kernel: uha0: disabled, not probed. Jan 17 21:34:53 dopey /kernel: ahc1: disabled, not probed. Jan 17 21:34:53 dopey /kernel: ahb0: disabled, not probed. Jan 17 21:34:53 dopey /kernel: aha0: disabled, not probed. Jan 17 21:34:53 dopey /kernel: aic0: disabled, not probed. Jan 17 21:34:53 dopey /kernel: nca0: disabled, not probed. Jan 17 21:34:53 dopey /kernel: nca1: disabled, not probed. Jan 17 21:34:54 dopey /kernel: sea0: disabled, not probed. Jan 17 21:34:54 dopey /kernel: wt0: disabled, not probed. Jan 17 21:34:54 dopey /kernel: mcd0: disabled, not probed. Jan 17 21:34:54 dopey /kernel: mcd1: disabled, not probed. Jan 17 21:34:54 dopey /kernel: matcd0: disabled, not probed. Jan 17 21:34:54 dopey /kernel: scd0: disabled, not probed. Jan 17 21:34:54 dopey /kernel: ie0: disabled, not probed. Jan 17 21:34:54 dopey /kernel: ep0: disabled, not probed. Jan 17 21:34:54 dopey /kernel: ix0 at 0x300-0x30f irq 10 maddr 0xd0000 msize 32768 on isa Jan 17 21:34:54 dopey /kernel: ix0: address 00:aa:00:b4:57:30 Jan 17 21:34:55 dopey /kernel: le0: disabled, not probed. Jan 17 21:34:55 dopey /kernel: lnc0: disabled, not probed. Jan 17 21:34:55 dopey /kernel: lnc1: disabled, not probed. Jan 17 21:34:55 dopey /kernel: ze0: disabled, not probed. Jan 17 21:34:55 dopey /kernel: zp0: disabled, not probed. Jan 17 21:34:55 dopey /kernel: npx0: disabled, not probed. Jan 17 21:34:55 dopey /kernel: Probing for devices on the pci0 bus: Jan 17 21:34:55 dopey /kernel: configuration mode 2 allows 16 devices. Jan 17 21:34:55 dopey /kernel: chip0 <Intel 82434LX PCI cache memory controller> rev 17 on pci0:0 Jan 17 21:34:56 dopey /kernel: chip1 <Intel 82378IB PCI-ISA bridge> rev 3 on pci0:2 Jan 17 21:34:56 dopey /kernel: ahc0 <Adaptec 294X SCSI host adapter> rev 0 int a irq 11 on pci0:6 Jan 17 21:34:56 dopey /kernel: ahc0: reading board settings Jan 17 21:34:56 dopey /kernel: ahc0: 294x Single Channel, SCSI Id=7, aic7870, 16 SCBs Jan 17 21:34:56 dopey /kernel: ahc0: Downloading Sequencer Program...Done Jan 17 21:34:56 dopey /kernel: ahc0: Probing channel A Jan 17 21:34:56 dopey /kernel: ahc0 waiting for scsi devices to settle Jan 17 21:34:56 dopey /kernel: vga0 <Display device> rev 0 on pci0:14 Jan 17 21:34:56 dopey /kernel: pci0: uses 8392704 bytes of memory from a0000000 upto ffbfffff. Jan 17 21:34:56 dopey /kernel: pci0: uses 256 bytes of I/O space from fc00 upto fcff. Jan 17 21:34:57 dopey /kernel: changing root device to wd1a Jan 17 21:34:57 dopey /kernel: iscp->busy time out Jan 17 21:34:57 dopey /kernel: Reset timeout scb->status = ffff Jan 17 21:34:57 dopey /kernel: .TO=ffff: Jan 17 21:34:57 dopey /kernel: shutting down Jan 17 21:34:57 dopey /kernel: Diagnose timeout scb->status = ffff Jan 17 21:34:57 dopey /kernel: .TO=ffff: Jan 17 21:34:57 dopey /kernel: shutting down Jan 17 21:34:57 dopey /kernel: Configure timeout scb->status = ffff Jan 17 21:34:57 dopey /kernel: .TO=ffff: Jan 17 21:34:58 dopey /kernel: shutting down Jan 17 21:34:58 dopey /kernel: IAS timeout scb->status = ffff Jan 17 21:34:58 dopey /kernel: .TO=ffff: Jan 17 21:34:58 dopey /kernel: shutting down Jan 17 21:34:45 dopey lpd[85]: restarted Jan 17 21:35:02 dopey login: login on ttyv0 as gbernard Jan 17 21:37:39 dopey su: gbernard to root on /dev/ttyv0