*BSD News Article 53429


Return to BSD News archive

Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!news.kei.com!news.mathworks.com!tank.news.pipex.net!pipex!howland.reston.ans.net!newsfeed.internetmci.com!news.sprintlink.net!in1.uu.net!newshub1.wanet.net!ucsnews!snowmane!nash
From: nash@ucssun1.sdsu.edu (Ron Nash)
Newsgroups: comp.unix.solaris,comp.unix.admin,comp.unix.bsd,comp.unix.internals,comp.unix.questions,comp.unix.sys5.r4,comp.sys.sun.admin,comp.sys.sgi.admin,comp.unix.sco.misc
Subject: Re: HP Autoloader Drivers - HELP!!!!
Followup-To: comp.unix.solaris,comp.unix.admin,comp.unix.bsd,comp.unix.internals,comp.unix.questions,comp.unix.sys5.r4,comp.sys.sun.admin,comp.sys.sgi.admin,comp.unix.sco.misc
Date: 19 Oct 1995 16:45:50 GMT
Organization: San Diego State University Computing Services
Lines: 38
Distribution: inet
Message-ID: <465vbu$j92@gondor.sdsu.edu>
References: <463fcj$pfq@scotsman.ed.ac.uk>
NNTP-Posting-Host: 130.191.17.126
X-Newsreader: TIN [version 1.2 PL0]
Xref: euryale.cc.adfa.oz.au comp.unix.solaris:49784 comp.unix.admin:34151 comp.unix.bsd:16738 comp.unix.internals:9195 comp.unix.questions:71493 comp.unix.sys5.r4:10394 comp.sys.sun.admin:55144 comp.sys.sgi.admin:21184 comp.unix.sco.misc:7758

Configure it to run as a stacker and use ufsdump with the l option:

     l    Autoload.  When the end-of-tape is reached  before  the
          dump is complete, take the drive offline and wait up to
          two minutes for the tape drive to be ready again.  This
          gives autoloading (stackloader) tape drives a chance to
          load a new tape.  If the  drive  is  ready  within  two
          minutes,  continue.  If  it  is not, prompt for another
          tape and wait.
 

johnb (ercs50@castle.ed.ac.uk) wrote:
: We recently bought an HP c1355A DDS-2 Autoloader.  I want it to back up 40GB
: of data unattended - i.e. when one tape is full it just goes on to the next.

: Apparently I need a special device driver to make it work like this, but this 
: seems absolutely supid to me - I thought that 'Auto' and 'Loader' meant that 
: the tapes would load automatically.

: Does anybody have any experience of this?  If so, do I need a driver and 
: where can I get one - FOR ANY UNIX PLATFORM (I'll port it if I have to).

: At present we're trying to back the whole lot up using a couple of DAT drives, 
: lots of sleepless nihts and tape changes, and a whole load of beer.

: HELP!

: Any advice, info or pointers are gratefully welcome.

: Thanks.

: john Birtley.

--
     _ ___,;;;/  | Ron Nash (nash@sdsu.edu) San Diego State University
  ,;( )__, )~\|  | 
 ;; //   '--;    | Gin-N-Tonic   endurance horse
 '  ;\    |      | Luv on Fire   trusty trail horse