Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!news.sprintlink.net!noc.netcom.net!tweety.uscs.com!news From: scotte@center.uscs.com (L. Scott Emmons) Newsgroups: comp.unix.bsd.freebsd.misc Subject: 2.0.5 on Intel EtherExpress Date: 18 Oct 1995 14:46:04 GMT Organization: U.S. Computer Services Research Center, El Dorado Hills, CA Lines: 24 Distribution: world Message-ID: <SCOTTE.95Oct18074604@odie.center.uscs.com> NNTP-Posting-Host: odie.center.uscs.com Has anyone been successful at getting FreeBSD 2.0.5 up on an Intel EtherExpress (EXP16) card? I believe I have everything configured properly, but FreeBSD doesn't seem to like the card. It works fine with DOG/windoze. I got FreeBSD to work just fine on a 3c503 with a similar setup but am having trouble with the Intel card. FreeBSD finds the card when it probes, but that's about as far as it goes. I have disabled probing for mcd0 and mcd1 to solve irq/io conflicts. I have the card configured (via the config diskette) for: io=300 irq=10 iomem=d0000 iosize=32k ROM=none (what FreeBSD expects for ix0 by default). If anyone has worked with a similar configuration I would appreciate any help in getting this puppy up. Thanks! -Scott -- __________________________________________________________________________ L. Scott Emmons | CableData R&D Center - El Dorado Hills, CA, USA (916)939-6088 | >> Standard disclaimer applies. Views are my << scotte@center.uscs.com | >> own, not those of U.S. Computer Services. <<