Return to BSD News archive
Newsgroups: comp.unix.bsd Path: sserve!manuel!munnari.oz.au!uunet!wupost!cs.utexas.edu!sun-barr!ames!sgi!rigden.wpd.sgi.com!rpw3 From: rpw3@rigden.wpd.sgi.com (Rob Warnock) Subject: Re: /386bsd: reject 65340 Message-ID: <q1vejko@sgi.sgi.com> Sender: rpw3@rigden.wpd.sgi.com Organization: Silicon Graphics, Inc. Mountain View, CA Date: Sat, 19 Sep 1992 14:11:50 GMT Lines: 29 I was doing fine with my WD8013 "Combo" until I applied Barry Lustig's patch to turn on 16-bit transfers. Then the "reject"s started: Sep 19 04:33:01 jolly /386bsd: reject 65531reject 65531reject 65531reject 65531 Sep 19 04:33:01 jolly /386bsd: reject 65531 Sep 19 04:33:03 jolly last message repeated 2 times Sep 19 04:33:06 jolly /386bsd: reject 65531reject 65531 Sep 19 04:33:06 jolly /386bsd: reject 65531reject 65531reject 65531reject 65531 Sep 19 04:33:06 jolly /386bsd: reject 65531 Sep 19 04:33:06 jolly /386bsd: reject 65531 I had to back out the change. (Barry? *Help!*) -Rob p.s. My config line: device we0 at isa? port 0x280 net irq 2 iomem 0xd0000 iosiz 8192 vector weintr p.p.s. Late flash: It looks like perhaps some bits of "laar.laar_byte" are used but never initialized... What should they be set to? (0?) ----- Rob Warnock, MS-9U/510 rpw3@sgi.com Silicon Graphics, Inc. (415)390-1673 2011 N. Shoreline Blvd. Mountain View, CA 94043