Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!chi-news.cic.net!newsfeed.internetmci.com!tank.news.pipex.net!pipex!dispatch.news.demon.net!demon!awfulhak.demon.co.uk!awfulhak.demon.co.uk!not-for-mail From: brian@awfulhak.demon.co.uk (Brian Somers) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Hylafax outgoing Date: 9 Oct 1995 05:35:03 +0100 Organization: None Lines: 180 Message-ID: <45a8pn$jqu@awfulhak.demon.co.uk> X-NNTP-Posting-Host: awfulhak.demon.co.uk X-Newsreader: TIN [version 1.2 PL2] Hi, I've been having problems with Hylafax... I've talked to the mail list on sgi.com, but no-one seems to know what I'm talking about (except one guy who reckons there's nothing wrong). I have a USR-Sportster 28.8 modem and Hylafax 3.0p1. I had the same problems with Flexfax2.3beta036. My configuration file is the standard one with a DTR of 115200 (attached below for anyone interested). I receive faxes ok and faxgetty will spawn a getty ok. I can dial out ok (although that's not really relevent). I'm using FreeBSD-2.0.5-RELEASE. When I try to send a fax (to any one of several other machines) I send a AT+FDT to the modem and the modem responds with a +FCS message. The software does not grok this and times out waiting for CONNECT. I've even tried connecting to another USR 28800 - same problem. The error file is as follows: Sep 25 20:03:00.89: [14351]: SESSION BEGIN Sep 25 20:03:00.90: [14351]: DELAY 2600 ms Sep 25 20:03:03.51: [14351]: <-- [16:ATE0V1Q0X4S0=0H0] Sep 25 20:03:03.78: [14351]: --> [16:ATE0V1Q0X4S0=0H0] Sep 25 20:03:03.78: [14351]: --> [2:OK] Sep 25 20:03:03.78: [14351]: <-- [31:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1] Sep 25 20:03:04.05: [14351]: --> [2:OK] Sep 25 20:03:04.05: [14351]: <-- [13:AT+FCLASS=2.0] Sep 25 20:03:04.19: [14351]: --> [2:OK] Sep 25 20:03:04.19: [14351]: <-- [8:AT+FLO=2] Sep 25 20:03:04.33: [14351]: --> [2:OK] Sep 25 20:03:04.33: [14351]: <-- [8:AT+FPP=0] Sep 25 20:03:04.47: [14351]: --> [2:OK] Sep 25 20:03:04.47: [14351]: <-- [8:AT+FBO=0] Sep 25 20:03:04.61: [14351]: --> [2:OK] Sep 25 20:03:04.61: [14351]: <-- [9:AT+FCT=30] Sep 25 20:03:04.75: [14351]: --> [2:OK] Sep 25 20:03:04.75: [14351]: <-- [10:AT+FCQ=0,0] Sep 25 20:03:04.89: [14351]: --> [2:OK] Sep 25 20:03:04.89: [14351]: <-- [14:AT+FNR=1,1,1,1] Sep 25 20:03:05.03: [14351]: --> [2:OK] Sep 25 20:03:05.03: [14351]: <-- [8:AT+FIE=0] Sep 25 20:03:05.17: [14351]: --> [2:OK] Sep 25 20:03:05.17: [14351]: <-- [22:AT+FCC=1,5,2,2,0,0,0,0] Sep 25 20:03:05.31: [14351]: --> [2:OK] Sep 25 20:03:05.31: [14351]: <-- [4:ATM1] Sep 25 20:03:05.58: [14351]: --> [2:OK] Sep 25 20:03:05.64: [14351]: <-- [13:AT+FCLASS=2.0] Sep 25 20:03:05.79: [14351]: --> [2:OK] Sep 25 20:03:05.79: [14351]: <-- [8:AT+FLO=2] Sep 25 20:03:05.93: [14351]: --> [2:OK] Sep 25 20:03:05.93: [14351]: <-- [8:AT+FPP=0] Sep 25 20:03:06.07: [14351]: --> [2:OK] Sep 25 20:03:06.07: [14351]: <-- [8:AT+FBO=0] Sep 25 20:03:06.21: [14351]: --> [2:OK] Sep 25 20:03:06.21: [14351]: <-- [9:AT+FCT=30] Sep 25 20:03:06.35: [14351]: --> [2:OK] Sep 25 20:03:06.35: [14351]: <-- [10:AT+FCQ=0,0] Sep 25 20:03:06.49: [14351]: --> [2:OK] Sep 25 20:03:06.49: [14351]: <-- [14:AT+FNR=1,1,1,1] Sep 25 20:03:06.63: [14351]: --> [2:OK] Sep 25 20:03:06.63: [14351]: <-- [8:AT+FIE=0] Sep 25 20:03:06.77: [14351]: --> [2:OK] Sep 25 20:03:06.77: [14351]: <-- [22:AT+FCC=1,5,2,2,0,0,0,0] Sep 25 20:03:06.91: [14351]: --> [2:OK] Sep 25 20:03:06.91: [14351]: <-- [23:AT+FLI="Coverform Ltd."] Sep 25 20:03:07.05: [14351]: --> [2:OK] Sep 25 20:03:07.05: [14351]: DIAL (0181)9324062 Sep 25 20:03:07.05: [14351]: <-- [17:ATDT(0181)9324062] Sep 25 20:03:21.84: [14351]: --> [4:+FCO] Sep 25 20:03:23.30: [14351]: --> [27:+FNF:B500760BD4FDBBF962E321] Sep 25 20:03:23.30: [14351]: REMOTE NSF "B500760BD4FDBBF962E321" Sep 25 20:03:24.46: [14351]: --> [27:+FCI:" 44 0181 9324062 "] Sep 25 20:03:24.46: [14351]: REMOTE CSI "44 0181 9324062" Sep 25 20:03:25.28: [14351]: --> [20:+FIS:1,5,2,2,1,0,0,0] Sep 25 20:03:25.28: [14351]: --> [2:OK] Sep 25 20:03:25.28: [14351]: REMOTE best rate 14400 bit/s Sep 25 20:03:25.28: [14351]: REMOTE max page width 2432 pixels in 303 mm Sep 25 20:03:25.28: [14351]: REMOTE max unlimited page length Sep 25 20:03:25.28: [14351]: REMOTE best vres 7.7 line/mm Sep 25 20:03:25.28: [14351]: REMOTE best format 2-D MR Sep 25 20:03:25.29: [14351]: REMOTE best 0 ms/scanline Sep 25 20:03:25.29: [14351]: REMOTE does not support PostScript transfer Sep 25 20:03:25.29: [14351]: USE 14400 bit/s Sep 25 20:03:25.29: [14351]: USE 0 ms/scanline Sep 25 20:03:25.29: [14351]: SEND file "docq/doc7.cover;01" Sep 25 20:03:25.30: [14351]: USE page width 1728 pixels in 215 mm Sep 25 20:03:25.30: [14351]: USE unlimited page length Sep 25 20:03:25.30: [14351]: USE 7.7 line/mm Sep 25 20:03:25.30: [14351]: USE 1-D MR Sep 25 20:03:25.30: [14351]: <-- [22:AT+FIS=1,5,0,2,0,0,0,0] Sep 25 20:03:25.45: [14351]: --> [2:OK] Sep 25 20:03:25.45: [14351]: <-- [6:AT+FDT] Sep 25 20:03:25.60: [14351]: --> [20:+FCS:1,5,0,2,0,0,0,0] Sep 25 20:03:33.95: [14351]: --> [20:+FCS:1,5,0,2,0,0,0,0] Sep 25 20:03:42.31: [14351]: --> [20:+FCS:1,5,0,2,0,0,0,0] Sep 25 20:03:50.80: [14351]: --> [7:+FHS:25] Sep 25 20:03:50.80: [14351]: REMOTE HANGUP: DCS sent 3 times without response (code 25) Sep 25 20:03:50.80: [14351]: --> [2:OK] Sep 25 20:04:02.20: [14351]: ABORT: job abort requested Sep 25 20:04:27.33: [14351]: ABORT: job abort requested Sep 25 20:04:30.20: [14351]: ABORT: job abort requested Sep 25 20:04:32.08: [14351]: ABORT: job abort requested Sep 25 20:04:33.46: [14351]: ABORT: job abort requested Sep 25 20:04:34.85: [14351]: ABORT: job abort requested Sep 25 20:05:42.18: [14351]: ABORT: job abort requested Sep 25 20:06:50.81: [14351]: MODEM <Timeout> Sep 25 20:06:50.81: [14351]: SEND FAILED: Job aborted by user Sep 25 20:06:50.81: [14351]: <-- [4:ATH0] Sep 25 20:06:55.83: [14351]: MODEM <Timeout> Sep 25 20:06:55.83: [14351]: SESSION END My config file is as follows: CountryCode: 44 AreaCode: 181 FAXNumber: +44.181.932.4259 LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: etc/dialrules ServerTracing: 1 SessionTracing: 43 RecvFileMode: 0660 LogFileMode: 0640 DeviceMode: 0660 RingsBeforeAnswer: 1 SpeakerVolume: low GettyArgs: "Modem-%s" LocalIdentifier: "Coverform Ltd." TagLineFont: etc/lutRS18.pcf TagLineFormat: "From %%l|%c|Page %%p of %%t" MaxRecvPages: 50 # # Modem-related stuff: should reflect modem command interface # and hardware connection/cabling (e.g. flow control). # ModemType: Class2.0 # use class 2.0 interface ModemRate: 115200 ModemFlowControl: rtscts # XON/XOFF flow control assumed # ModemNoFlowCmd: AT&H0&I0&R1 # setup modem for no flow control ModemHardFlowCmd: AT&H1&I0&R2 # setup modem for hardware flow control ModemSoftFlowCmd: AT&H2&I2&R1 # setup modem for software flow control # ModemSetupDTRCmd: ATS13=1&D2 # setup so DTR drop resets modem ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not) ModemResultCodesCmd: ATQ0X4 # enable extended result codes # # NB: adaptive answer only seems to work properly when # the modem is left idling in Class 2.0 # ModemSetupAACmd: AT+FAA=1 # # Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH. # Note that we both turn the speaker on/off and set volume. # ModemSetVolumeCmd: "ATM0 ATM1 ATM1 ATM1 ATM1" # # Modem does not support HDLC frame tracing; we add this just # to eliminate spurious ERROR results that confuse the naive. # Class2BUGCmd: AT+FBU=0 # # The modem doesn't support copy quality checking, even though it # returns (0-2,0-2) for AT+FCQ=?; therefore we disable it to keep the # fax software from complaining. # Class2CQCmd: AT+FCQ=0,0 # disable copy quality checking Any help ?... thanks -- Brian <brian@awfulhak.demon.co.uk> Don't _EVER_ lose your sense of humour....