Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!lll-winken.llnl.gov!venus.sun.com!cs.utexas.edu!howland.reston.ans.net!usenet.ins.cwru.edu!cleveland.Freenet.Edu!dh950 From: dh950@cleveland.Freenet.Edu (Kair-Chuan Lim) Newsgroups: comp.unix.admin,comp.unix.bsd.bsdi.misc Subject: Help with SLip & PPP connection Date: 11 Sep 1995 21:10:09 GMT Organization: Case Western Reserve University, Cleveland, OH (USA) Lines: 16 Message-ID: <4328jh$9t7@usenet.INS.CWRU.Edu> Reply-To: dh950@cleveland.Freenet.Edu (Kair-Chuan Lim) NNTP-Posting-Host: kanga.ins.cwru.edu Xref: euryale.cc.adfa.oz.au comp.unix.admin:32558 comp.unix.bsd.bsdi.misc:895 Dear UNIX Masters, I was finally able to get SLIP to work on my server. I can dial-in and login to the server. So what's my problem? What I cannot work out is the onward connection to the Internet through the T1 line attached to the server. Once connected and logged in, I cannot access any network applications, eg. ping, web-browser, telnet. How do you set up the connection to run these applications? My routing table does not show any sl0 interface. Any advice is very much appreciated.. Thanks Steve Lim