Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!pravda.aa.msen.com!spool.mu.edu!howland.reston.ans.net!agate!news.ucdavis.edu!bullwinkle!itannman From: itannman@bullwinkle.ucdavis.edu (Ann Mansker) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: 3C589 setup Date: 1 Sep 1995 23:57:35 GMT Organization: University of California, Davis Lines: 16 Message-ID: <4286lf$epu@mark.ucdavis.edu> References: <41tnu8$605@mark.ucdavis.edu> <427pmf$k5f@gap.cco.caltech.edu> NNTP-Posting-Host: bullwinkle.ucdavis.edu X-Newsreader: TIN [version 1.2 PL2] Ching Shih (shih) wrote: : I have a 3Com 589 EtherLink III (Combo) in my Toshiba T1950CT. : It works very well with its 10 BaseT connection. : I set its IRQ to 10, PORT to 0x330. : However I have never been able to make it work with its : Thin-wide connection. : Ching Shih : shih@cithe502.cithep.caltech.edu I tried recompiline with that port, but it didn't help. I'm nervous about changing the irq, because I'm told it should be the same for both operating systems. Ann M.