Return to BSD News archive
#! rnews 1150 bsd Newsgroups: comp.unix.bsd.freebsd.misc Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!news.kei.com!news.mathworks.com!tank.news.pipex.net!pipex!news.sprintlink.net!in1.uu.net!ftpbox!mothost!schbbs!secfax2!ronf From: ronf@phx.sectel.mot.com (Ron Feigen) Subject: HELP!: 3comm -link0, -link1 options Reply-To: ronf@phx.sectel.mot.com Organization: Motorola, Inc., GSTG Date: Thu, 24 Aug 1995 20:34:07 GMT Message-ID: <1995Aug24.203407.23523@schbbs.mot.com> Sender: news@schbbs.mot.com (SCHBBS News Account) Nntp-Posting-Host: 192.94.147.14 Lines: 19 I am trying to use a 3comm 3c509B w/BNC with 2.0.5 I hear rumors that you need to pass in extra ifconfig parameters -link0, -link1, -link2,..... Does anybody know what parameter is correct for the BNC connector? Also a few questions about the card setup. I set the card to match 2.0.5 IRQ 10, port 0x300, iomem d000. But how much memory should be mapped at d000 16K or 32K? Can I not map any memory (disable d000)? There was a option for driver configuration, The choices where DOS, windows, server. Is server the correct choice? Thanks in advance Ron