Return to BSD News archive
Path: sserve!newshost.anu.edu.au!harbinger.cc.monash.edu.au!msunews!uwm.edu!news.alpha.net!news.mathworks.com!news.bluesky.net!news.sprintlink.net!news1.wolfe.net!infoman.net99.net!oxy.rust.net!w8hd2.w8hd.org!not-for-mail From: kimc@w8hd.org (Kim Culhan) Newsgroups: comp.os.386bsd.questions Subject: SCSI drive rendered unusable by partitioning Date: 5 Feb 1995 19:56:43 -0500 Organization: The w8hd Group Lines: 35 Message-ID: <3h3s4b$s2@w8hd2.w8hd.org> NNTP-Posting-Host: w8hd2.w8hd.org Keywords: freebsd X-Newsreader: NN version 6.5.0 #16 (NOV) FreeBSD was brought up a week ago on a 486 machine with Buslogic 445c controller. This weekend it was shut down to add a dos partition to the scsi drive. There has always been an IDE drive with dos on it. The procedure in the docs was followed to use the dos fdisk utility to create a dos partition, then rebooted on the FreeBSD boot floppy to finish with the bsd fdisk and disklabel routines. On choosing (P)roceed, the system runs newfs on the partitions as usual then announces: unzipping /stand/sysinstall into hard disk At this point it panics with this message: panic: getnewbuf: inconsistent EMPTY queue. The procedure which worked the first time was tried, using the whole disk for bsd but same result. When the boot floppy loads the kernel, the cyl size is reduced as shown when it gets to the point where the scsi disk is found. the disk has 1442 cyls and it shows 1429. This figure cannot be changed by formatting the drive. Even tried it on a Sun machine, where the drive came from. Also tried the 'fcnuke' utility from Buslogic to 'nuke' the partition, whatever that does. Still no change. Any help on this would be very greatly appreciated. regards kim culhan -- - kimc@w8hd.org