Return to BSD News archive
Newsgroups: comp.unix.bsd Path: sserve!manuel!munnari.oz.au!bunyip.cc.uq.oz.au!kirk!bambi From: bambi@bu.oz.au (David J. Hughes) Subject: Re: Problem with WD8003-Card in BSD386 Message-ID: <1992Aug13.041233.19623@kirk.bu.oz.au> Organization: ITS, Bond University References: <1992Aug12.150941.2281@cosy.sbg.ac.at> Date: Thu, 13 Aug 1992 04:12:33 GMT Lines: 19 peter@panther.cosy.sbg.ac.at (Peter Burgstaller) writes: >I can't set the jumpers on my ethernet-card to irq 2, the only settings >my card accepts is irq 3 or irq 5. The vast majority of WD cards allow software configuration. Check for a jumper marked "Soft". If you have the WD Drivers disk that came with the card you can try to check that things are working by setting the values and then running test. It'll soon tell you if the software configuration has worked. bambi ___ David J. Hughes bambi@bu.oz.au / \ / / / / __/ __ __ ____/ / / __ Senior Network Programmer / \ / \ / \ / / / / / \ / Comms Development & Operation \____/ \__// / \__/ \___/ / / / AUSTRALIA (+61 75 951450)