Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!agate!howland.reston.ans.net!cs.utexas.edu!swrinde!menudo.uh.edu!not-for-mail From: vxb07138@menudo.uh.edu (vivek) Newsgroups: comp.os.386bsd.questions Subject: 486/66 running 386bsdi, setup second SCSI drive for Windows NT Date: 17 Mar 1994 17:41:15 -0600 Organization: /usr/local/news/organization Lines: 11 Message-ID: <2mapqr$shr@menudo.uh.edu> NNTP-Posting-Host: menudo.uh.edu I have a 486/66 running 386bsdi with a primary SCSI hard drive and an ADAPTEC controller. I would like to add a second SCSI hard-drive and load Windows-NT on it. Someone suggested that I should (a) add the second SCSI and make it the active drive (using disksetup?) (b) re-boot with the NT setup disk #1 in the floppy drive, and proceed with loading Windows-NT (c) to switch between the two, select the appropriate drive in the NT disk manager or disksetup. Is this the best soln. If so, how do I add the second SCSI using disksetup Else, I would appreciate suggestions (with detail since I am a novice) ! Thx in adv.