Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!nic.hookup.net!swrinde!cs.utexas.edu!natinst.com!hrd769.brooks.af.mil!hrd769.brooks.af.mil!not-for-mail From: burgess@hrd769.brooks.af.mil (Dave Burgess) Newsgroups: comp.os.386bsd.questions Subject: Re: Printer (HP LaserJet III) help! Date: 18 Jan 1994 15:54:56 -0600 Organization: Armstrong Laboratory, Brooks AFB, TX Lines: 28 Message-ID: <2hhlru$5ki@hrd769.brooks.af.mil> References: <2hc3cc$g0i@news.ysu.edu> NNTP-Posting-Host: hrd769.brooks.af.mil In article <2hc3cc$g0i@news.ysu.edu>, Christopher L. Mikkelson <ap713@yfn.ysu.edu> wrote: > >I have had troubles getting an HP Ljet 3 working under FreeBSD-1.0R. >When I print, everything comes out with no CRs. Is anybody else using >an Ljet3 under FreeBSD? If you are, please send me your printcap and, >if any, filters. BTW, my printer is on lpa0 (not serial). # @(#)printcap 5.3 (Berkeley) 6/30/90 # # tr= Trailer String at end of any jobs # mx= Maximum size of job (0 = no limit) # sh= no header page # ff= the 'form feed': Reset printer, CR=>CR, LF=CR+LF, FF=CR+FF # fo= send 'form-feed' when opening device # lp|"Unisys Desktop III Laser Printer in LJet mode":\ :lp=/dev/lp:\ :sd=/var/spool/lpd:lf=/var/log/lpd-errs:af=/usr/spool/lpr-prints:\ :mx#0:tr=\033&l0H:fo:ff=\033&l66P\033&l7C\033E\033&k2G\033&a10L:sh: Close enough? -- TSgt Dave Burgess NCOIC Applications Programming Branch US Strategic Command, Offutt AFB, NE burgessd@j64.stratcom.af.mil