Return to BSD News archive
Xref: sserve comp.os.386bsd.announce:164 comp.answers:2598 news.answers:14259
Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!agate!usenet.ins.cwru.edu!gatech!swrinde!news.dell.com!natinst.com!hrd769.brooks.af.mil!hrd769.brooks.af.mil!not-for-mail
From: burgess@hrd769.brooks.af.mil (Dave Burgess)
Newsgroups: comp.os.386bsd.announce,comp.answers,news.answers
Subject: [comp.os.386bsd] BNR/2 derived BSD for PCs FAQ (Part 2 of 10)
Followup-To: comp.os.386bsd.misc
Date: 15 Nov 1993 03:36:08 -0000
Organization: Armstrong Laboratory, Brooks AFB, TX
Lines: 821
Approved: news-answers-request@MIT.Edu
Distribution: world
Expires: 12/03/93
Message-ID: <386bsd-faq-2-753334572@hrd769.brooks.af.mil>
References: <386bsd-faq-1-753334572@hrd769.brooks.af.mil>
Reply-To: 386bsd-faq@hrd769.brooks.af.mil (386bsd FAQ Maintainer)
NNTP-Posting-Host: hrd769.brooks.af.mil
Posted-By: auto-faq 2.4
Archive-name: 386bsd-faq/part2
Section 1. (General Network Information)
General information
This section of the FAQ is about the electronic support network
that exists for 386bsd.
1.0 What is 386BSD? (Taken from the INSTALL.NOTES by the Jolitz's)
Welcome to 386BSD Release 0.1, the second edition of the 386BSD
operating system created by William and Lynne Jolitz. Like its
predecessor, 386BSD Release 0.0, Release 0.1 comprises an entire
and complete UNIX-like operating system for the 80386/80486-based
AT Personal Computer.
386BSD Release 0.1 is an enhanced version of the original release
done by William F. Jolitz, the developer of 386BSD. 386BSD
Release 0.0 was based on the Networking Software, Release 2 from
the University of California at Berkeley EECS Department, and
included much of the 386BSD work done earlier by Bill and
contributed by us to the University. The latest release, 386BSD
Release 0.1, contains new work by the developer and many new items
which have been freely contributed by other software developers
for incorporation into 386BSD (see the file CONTRIB.LIST). These
contributions have increased the functionality and made it more
robust. As a courtesy to the developer and the many people who
have generously contributed these software enhancements, we request
that users abide by and properly maintain all attributions,
copyrights, and copylefts contained within this release.
386BSD is intended to foster new research and development in
operating systems and networking technology by providing this base
technology in a broadly accessible manner. As such, like its
predecessor, 386BSD Release 0.1 is freely redistributable and
modifiable.
1.0.1 What are these other Free BSD systems?
For reasons best left to private E-Mail, there have been two
different 'product lines' that have been established for
development of BSD systems. They are NetBSD and FreeBSD. Both,
individually, have virtually deprecated the original 386bsd.
The "raison d'etre" for each is different and each has a different
set of goals. The purpose for FreeBSD is to develop a stable
working environment for [3-9]86 systems. The emphasis has been
on upgrading utility programs and incorporating changes that make
the system more stable.
NetBSD, on the other hand, is a development effort whose main
thrust is on mulitple platform support and staying more current
with BSD 4.4.
Both systems are excellent choices for the casual user or people
who are interested in studying the internals of an operating
system. While the products are nearly commercial quality, they
are both maintained by volunteers.
1.0.2 I just downloaded all of 386bsd version 0.1 and I get can't get
[some feature] to work? Do you have any suggestions?
Yes. Get either FreeBSD or NetBSD.
The original 386BSD software was kind of buggy when it was put
up for anonymous FTP last year. It has been modified significantly
since then, and now exists in a different form. There are people
who will argue that the original 386BSD was completely unusable,
but that is generally an overstatement.
Over 100 patches were applied to the original system, with hundreds
more waiting in the wings. To get this 'patched' version of
386bsd, get FreeBSD instead. To get a version that split from
386bsd to try and stay more in line with the BSD 4.4 system, and
also provide a multiplatform development system, get NetBSD.
Getting one of these two systems will provide you with a more
complete system, with newer utilities, and many bugs already
fixed.
1.1 Feature summary
Among the many features of these BNR/2 systems:
* Floppy disk based Installation
* Hard drive partitioning for use with MS-DOS partitions
* Compressed, multivolume CPIO dump format binary/source/other
distribution sets on MS-DOS floppies.
* 387 support or emulation.
* SCSI support.
* CD-ROM support.
* NFS, TCP/IP and full networking.
* MS-DOS file system access (in newer *BSD systems).
1.2 The future of 386BSD.
Forecasting the future is always a tricky business. There is work
underway to implement version 0.2 of 386bsd. In addition, many
people are involved in a project to put together a 386bsd version
(FreeBSD) which will be a complete distribution set including all
relevant patches and updates to new versions of many of the
software packages that are currently available. It is available
by anonymous FTP from FreeBSD.cdrom.com
In addition, NetBSD (a direct descendent of 386bsd) is available
for anonymous FTP from sun-lamp.cs.berkeley.edu. The purposes of
these two apparent competitors appear to be at odds, but in
fact are very similar. NetBSD has taken a 'stable, production
quality, free OS' as one of its primary goals, where 386bsd
pursues the high ideal of the ultimate OS research platform.
There is considerable cross pollination of the two. The frequent
debates on style and concept that appear in comp.os.386bsd.*
are testimony to that point. NetBSD and FreeBSD are still both
very viable operating system alternatives, with differing goals.
To see the Future of 386bsd as seen by Bill and Lynne Jolitz, I
suggest you read the INSTALL.NOTES that come with 386bsd.
1.3 386BSD software projects in progress
The list of software projects in progress is just too volatile
to go into a static document like the FAQ. Suffice it to say, if
there is something you want to do using 386bsd; ask first to see
what has been done.
Nate Williams (nate@bsd.coe.montana.edu) has volunteered to be
the focal point for software projects. His job will be to get
people with similar interests together to minimize wasted effort
and people working at cross purposes.
1.3.1 Contacting software authors
Whenever you are working on a port of a software package, it is
always a good idea to contact the original author and offer
whatever changes you needed to make in order to port the software.
That way, subsequent releases of the package may include changes
that allow all users of 386bsd the advantage of reusing your work
over and over.
Also, once you have ported a package to *BSD, you might want to
send a note to either Nate Williams (nate@bsd.coe.montana.edu)
letting him know that you have completed a package and where it
is available.
If the port was a simple recompile of the source and install, a
note to one of the newsgroups telling the story could be considered
appropriate as well.
In keeping with that, if you find a 'bug' in 386bsd, or find a
problem that causes you some headaches and find a solution, you
should contact the author of the particular driver/module/program
and let them know. In addition, you could also post the problem
and/or fix to "comp.os.386bsd.bugs".
1.4 Minimum hardware configuration recommended
There has been considerable debate about what the REAL minimum
configuration for 386bsd is. Some would claim that it is the
smallest computer that an installation will succeed on. Others
claim that it is the smallest usable computer (based on RAM and
speed constraints) and others would claim that it should be
based on using 'X'-windows.
For specific hardware, see Section 8 (still in development).
The smallest install-able platform is an 80386, using an MGA card,
with at least 2Meg of RAM and a 20 Megabyte hard disk. While not
all SCSI cards (especially EISA) are supported, a great many are
either in the base distribution or through patches. This
configuration is tricky to prepare, and will certainly be hard to
use, but it is possible.
A comfortable installation which includes source and binary
distributions, as well as other utilities will work in about
100Meg of hard drive.
'X' requires at least a Hercules MGA; for masochists only, from
what I understand.
See section 8 for more details.
1.5 Where to get the source and binaries
1.5.1 Forms available (floppy, FTP, CD-ROM)
386bsd is available in just about every format known to man, with
the possible exception of stone tablets and papyrus.
1.5.1.1 Where can I get the distribution on floppy or tape?
Many people will copy files onto diskettes or tapes if you
coordinate it with them ahead of time. In addition, many
companies offer 386bsd on various types of media for money.
Austin Code Works and others (usually advertisers in PC
magazines) offer the base 0.1 "official" distribution for a fee.
Note that there are virtually no restrictions on distributing
the 386bsd distributions. Basically, wherever you can find it,
you can get it. This goes for FreeBSD and NetBSD as well.
1.5.1.2 Where can I get the distribution via FTP?
The files you should look for specifically when using FTP are
directories called srcdist, bindist, and etcdist. These
directories will hold the files for each of the distributions.
Once you have received the files via FTP, you can either load
them directly onto your system and then un archive them using
'extract' or one of the other methods suggested in Section 2 of
the FAQ, in the section about installing with 'real partitioning'.
The list of sites that have 386BSD is covered in section 1.8 below.
This list is produced automatically by using a utility called
'archie' and is updated for every new version of the FAQ. If you
try to access a site from this list and find that they either
don't have FTP enabled, or don't have 386bsd loaded any more,
a polite letter to the admin of the system asking them to
update their 'archie' entries is good manners.
1.5.1.3 Where can I get the distribution on CD ROM?
Infomagic sells a UNIX CD-ROM that has 386BSD. Their FAX number
is 609-683-5502.
Profit Press has 386BSD dated 7/21/92 on their "Mega Win OS/2"
CD-ROM. This is in the format of BINDIST, ETCDIST, SRCDIST and
BOOTABLE.
Profit Press
2956 N. Campbell Ave
Tucson, Arizona 85719
(602) 577-9696
Their order line is 1-800-843-7990
Look for their advertisements in the back pages of Computer
Shopper. The Mega series is $29.00 each or $69.00 for all three
plus a fourth "Demo Disk".
In all likelihood, the version 386bsd that is available on CD-ROM
will be the 0.1 version, without any patches. Keep this in mind
when ordering, since the first thing most people want to do is
bring the system up to the current patch level.
For our European users, I have included this note from Julian
Stacey, (stacey@guug.de) concerning locations and methods for
getting 386bsd in Europe on both CD-ROM and floppies.
In Munich Germany:
Buy the monthly "c't magazin fuer computer technik" (Price 8.5 DM)
(~1.7 = $1) & look in back pages, I saw:
Mail Order:
JF Lehmanns Buchhandlung, fuer EDV,
Zuelpicher Str 182, D-50937 Koeln, Germany
Free catalogue for X, Linux, 386bsd, 1.
Confusing advert seems to offer X11R5 + GNU + 386BSD
on CD Rom "InfoMagic Vol2 No2" for Price: 149 DM.
Tel. 0130 4372 (always busy, claims to be free,
so don't know if +49 130 4372 viable)
Fax: +49 221 415995
Shops in Berlin, Koeln, Regensburg, Ulm.
(Editorial Notes: DM149 is about $75-$90 US (or a little more)
and 0130 numbers are Toll Free in Germany only.)
Mail Order:
Computer Solutions Software GmbH
Postfach 1180, D-85561 Grafing (Muenchen), Germany
Tel +49 8092 5018
Fax +49 8092 31727
23 * 3.5" 1.4M flops @ Price: DM199
Order No:/Best Nr: 5099
Shop:
Columbus Datentechnik,
Theresienstr 63, D-80333 Muenchen, Germany
Tel +49 89 5232021
Lynne wrote a short follow-up, letting us know that these
companies do not send them any money.
(Linux was advertised in the mag. @ 89DM, both Linux & 386BSD
distributions were offered as something over 20 1M floppies )
Many people would happily under cut high price commercial
distributors, pocket some for media & copying hassle and
forward the remainder to subsidize Bill & Lynne's development
efforts.
This information is offered with no warranties, guarantees,
franchise offers, or recommendations.
1.6 Electronic Information Groups for 386BSD
1.6.1 Usenet newsgroups
List below are the Usenet newsgroups that were developed to support
386bsd and its descendents. In addition, general BSD questions can
be posted to comp.1.bsd. Bear in mind, however; that your
questions to this group should really be about BSD in general, not
a specific implementation detail of *BSD.
comp.os.386bsd.announce
Announcements relating to the 386bsd operating system. (Moderated)
Posts should be mailed to "386bsd-announce@agate.berkeley.edu".
comp.os.386bsd.apps
Applications which run under 386bsd.
comp.os.386bsd.bugs
Bugs and fixes for the 386bsd OS and its clients.
comp.os.386bsd.development
Working on 386bsd internals.
comp.os.386bsd.misc
General aspects of 386bsd not covered by other groups.
comp.os.386bsd.questions
General questions about 386bsd.
1.6.2 Newsgroup archives.
These sites maintain a historical record of the traffic in the Usenet
Newsgroups indicated. There are others, but I haven't gotten their
names yet.
Host Name IP address Location Newsgroups archived
-------------------- -------------- -------------- ----------------
minnie.cs.adfa.oz.au 131.236.20.70 Australia comp.1.bsd
src.doc.ic.ac.uk 146.169.2.1 London, UK comp.os.386bsd.*
1.6.3 BNR/2 Derived bsd mailing lists.
There are at least two mailing lists for 386bsd. Both are for
discussions of the patchkit and patches. They are:
386bsd_patchkit@cs.montana.edu:
This list is primarily for discussion of the patchkit and other
patch procedure discussions.
patches@cs.montana.edu:
This list is for patch submissions.
NOTE: The patchkit is discussed in detail in Section 2 of the FAQ.
Also, the patchkit has been effectively deprecated. Sending to
these lists may or may not get you the kind of info you are looking
for.
In addition to these pure 386bsd lists mentioned above, there are
mailing lists available for FreeBSD and NetBSD. Information about
the NetBSD lists and how to use majordomo (the list handler) is
available by mailing to majordomo@sun-lamp.cs.berkeley.edu.
There are three mailing lists for FreeBSD and the are:
FreeBSD-hackers: for hackers
FreeBSD-questions: misc questions
FreeBSD-bugs: bug reports
Send to FreeBSD-hackers-request@freefall.cdrom.com to be added
to the hackers list, and *-questions-request@freefall... to be
added to the questions list.
1.6.4 Other electronic resources.
There are many bulletin boards throughout the world that have
386bsd software and information available. Also, there are
CompuServe and other on-line services that have 386bsd discussions.
1.7 Documentation available
There are two types of documentation for 386bsd. First is the
set that covers the operation and theory used in BSD-Unix.
These sources are often excellent for background and understanding
of the current implementation of 386bsd. Second is the set of
manuals written specifically for 386bsd. Most of these are books
and magazine articles written by Bill and Lynne Jolitz.
1.7.1 BSD manuals
The full set of BSD documentation is available via anonymous FTP
from ocf.berkeley.edu in /pub/Library/Computer/doc4.3. To print
this documentation on 386bsd systems, replace the ditroff
references in the Makefile with 'groff -e -t -msU {SRC} >out.ps'
to generate PostScript format files. Use different options to
make the output conform to other print styles.
The etc distribution also comes with a documentation directory
~/share/doc which has nearly 3Meg of documentation about 386bsd.
In addition, on-line manuals are available in the binary
distribution set. It contains specific information on the use
of UNIX utilities and commands. Type "man man" for information
on the online manual.
1.7.2 BSD books
There is an excellent set of works recommended by Bill and Lynne
in the INSTALL.NOTES. In addition, several other books have been
recommended by Andrew Moore and others.
For learning how to work in the Unix environment, the standard text
is "The Unix Programming Environment," by Kernighan and Pike.
For Unix Administration, the best is "Unix System Administration
Handbook," by Nemeth, Snyder and Seebass.
For systems level programming (i.e., systems calls), I recommend
"Advanced Unix Programming," by Marc Rochkind. Unfortunately it is
out-dated and oriented towards System V.
A new book "Advanced Programming in the Unix Environment," by W.
Richard Stevens is very up-to-date, and an excellent reference,
especially for dealing with POSIX standards issues.
For network programming, "Unix Network Programming," by W. Richard
Stevens is highly regarded.
The 4.3BSD Unix Manuals contain loads of invaluable tutorials and
historical papers in addition to hard copies of on-line documentation.
The six volume set is available from Usenix for $60.00 (email:
office@usenix.org)
I could go on, but let me mention just two more - if you have a full
386BSD installation, you may want to learn the bash shell (in
/usr/othersrc/public). This is an extension of the Bourne shell (sh)
with features from both the C shell (Csh) and the Korn shell (Ksh).
The Korn shell is described in "The Kornshell," by Korn (of course).
Second, I recommend you look at "The AWK Programming Language," by
Aho, Weinberger and Kernighan. This is a very nice prototyping
language - powerful and easy to use.
Another excellent reference book for 386bsd is "The Design and
Implementation of the 4.3BSD UNIX Operating system" by Samuel J.
Leffler, Marshall Kirk McKusick, Michael J. Karels, John S.
Quarterman, 1989, Addison-Wesley, ISBN 0-201-06196-1. While this
book is out of date in many sections, it is purported to be an
excellent source of historical information, if nothing else.
Chris Demetriou recommends the sections on the treatment of
file systems, caching and the networking layer. The sections in
this books which do not apply to 386bsd include the VM section,
bootstrapping, and autoconfig.
In addition, there are many other books which, for one reason or
another, have not made it into this brief list. Rest assured that
this is not intended to be an exhaustive list by any means. In
fact, Lynne Jolitz has offered to supply the FAQ with her preferred
reading list describing the current and future versions of 386bsd.
1.7.3 The Jolitz Book
Bill and Lynne Jolitz are writing a book about 386bsd. It will
be announced once it is ready. A tentative date of late 1992
was once offered, but since it is mid-ish 1993 and no book has
been announced, we can assume that it will be later than the
original estimate.
1.7.4 Dr. Dobbs' journal
For users who wish to understand the internals of the BNR/2 BSD
family of Operating Systems originally developed and/or ported by
William F. Jolitz from 1989 to the present, the most immediate
and available reference is the feature series entitled
"Porting UNIX to the 386: A Practical Approach", appearing in Dr.
Dobbs' Journal, USA (January 1991 to July 1992) and UNIX and iX
Magazines, Germany (June 1991 to present). For inquiries on the
article series (including reprints), contact the magazines for
information.
"Porting UNIX to the 386: A Practical Approach" (feature series) by
Jolitz and Jolitz
1/91: DDJ "Designing a Software Specification"
2/91: DDJ "Three Initial PC Utilities"
3/91: DDJ "The Standalone System"
4/91: DDJ "Copyright, Copyleft, and Competitive Advantage"
4/91: DDJ "Language Tools Cross-Support"
5/91: DDJ "The Initial Root Filesystem"
6/91: DDJ "Research and the Commercial Sector: Where Does
BSD Fit In?"
7/91: DDJ "A Stripped-Down Kernel"
8/91: DDJ "The Basic Kernel"
9/91: DDJ "Multiprogramming and Multiprocessing, Part I"
10/91: DDJ "Multiprogramming and Multiprocessing, Part II"
11/91: DDJ "Device Autoconfiguration"
2/92: DDJ "UNIX Device Drivers, Part I"
3/92: DDJ "UNIX Device Drivers, Part II"
4/92: DDJ "UNIX Device Drivers, Part III"
5/92: DDJ "Missing Pieces, Part I"
6/92: DDJ "Missing Pieces, Part II"
7/92: DDJ "The Final Step: Running Light with 386BSD"
You can contact M&T Books (DDJ) for reprints if you can't get them from
your technical library:
1-800-356-2002 (inside CA)
1-800-533-4372 (North America)
1-415-358-9500 (international)
6/91: UNIX Magazin "Portierung von BSD-UNIX auf den 80386. Heimlich
Liebe."
7/91: UNIX Magazin "Steighilfe."
8/91: UNIX Magazin "Systemverwaltung durch Tabellen"
9/91: UNIX Magazin "Sicher bewegen auf fremdem Terrain"
10/91: UNIX Magazin "Damit die Fehlersuche nicht zum Hurdenspringen
wird"
11/91: UNIX Magazin "Alles in eine Schublade"
12/91: UNIX Magazin "Feuer und Wasser"
1/92: UNIX Magazin "Rekursives Speicher-Mapping"
2/92: UNIX Magazin "Tanz auf dem Eis"
3/92: UNIX Magazin "Aus Hanschen wird Hans"
4/92: UNIX Magazin "Das Geheimnis des Multiprogramming"
5/92: UNIX Magazin "Zeitmanagement scheibenweise"
6/92: UNIX Magazin "Magie des Kernels"
7/92: UNIX Magazin "Erkenne Dich Selbst"
9/92: UNIX Magazin "Niemand is eine Insel"
10/92: UNIX Magazin "Treiberlatein"
12/92: UNIX Magazin "Einlandung erforderlich"
1/93: iX Magazin "Wir unterbrechen das Programm"
2/93: iX Magazin "Liste gut, alles gut"
3/93: iX Magazin "Blick ins Allerheiligste"
4/93: iX Magazin "Von Bl"ocken, Ringen und Zeichen"
NOTE: The series in UNIX Magazin was moved to IX Magazin in 1/93.
The article in the April issue was the last one in the series.
In addition, other major articles which discuss 386BSD in detail:
8/92: UNIX Magazin "Interview mit Bill Jolitz. Das passiert mit
386BSD" by Jurgen Fey
8/92: DDJ "Very High-Speed Networking" by W.F. Jolitz
12/92: DDJ "Inside the ISO-9660 Filesystem Format" by Jolitz and
Jolitz
Reprints of the first 19 parts on the UNIX Magazin series are available
from:
iX Redaktion
Stichwort: 386BSD-Serie
Verlag Heinz Heise GmbH & Co KG
Helstorfer Str. 7
D-30625 Hannover, Germany
Some of the parts are without code listings due to the unclear
status of the BSD releases stemming from the Net/2 release.
1.7.5 Other FAQ's on the net that are relevant
There are many FAQs that can be used in conjunction with 386bsd.
These include the FAQs for all of the GNU software, the different
shells that are available, the programming languages that are
available, and many more. In addition, many programs have their
own FAQ which should be referenced whenever that package is being
added. Good examples of the latter are the FAQs for elm, C-News,
and innd.
The observant reader will notice that there are very few 'X'
questions in this FAQ. The XFree86 FAQ is posted regularly to
comp.os.386bsd.*. There is no good reason to include any 'X'
questions in this FAQ, with the exception of the most basic
'Where can I get the 'X' FAQ'.
Most FAQs are available by anonymous FTP from rtfm.mit.edu and
via Usenet News in news.answers and/or comp.answers. This FAQ
is no exception (I hope).
1.8 FTP sites for 386BSD
A standard tool on Internet connected hosts for finding files is
'archie'. Searching the archie archive for either "386BSD" or
"386bsd" yields the following list. For UUCP sites, FTP-Mail
is available from gatekeeper.dec.com. The list below was created
with an 'archie -l' on 27 Sep 1993 searching for 386BSD.
For those folks that have access to telnet, but not FTP, you can use
archie by using telnet and connecting to 132.206.2.3. Log in as
'archie' and use the 'prog' command to find programs of interest.
The list below is included primarily for those folks that have only
uucp, and will need to get their software though UUCP and other
channels.
1.8.1 FTP Site List
This list is automatically generated every time the FAQ is
produced. Please do not request that your host be added to
this list. If your host is represented in an 'archie' list,
it will be reflected here. Several other sites are included
in Section 1.8.4 below.
Host Directory
agate.berkeley.edu /pub/386BSD/
animal-farm.nevada.edu /pub/386BSD/
archive.afit.af.mil /pub/386BSD/
ascwide.ascii.co.jp /pub2/386BSD/
bruno.cs.colorado.edu /pub/cs/doc/usl.vs.bsd/unigram/386BSD
cs.ubc.ca /mirror3/386BSD/
delbruck.pharm.sunysb.edu /pub/386BSD/
f.ms.uky.edu /incoming/386BSD/
ftp.cfi.waseda.ac.jp /pub3/386BSD/
ftp.cs.uni-sb.de /pub/386BSD/
ftp.luth.se /pub/386BSD/
grasp1.univ-lyon1.fr /pub/mirrors/386BSD/
hermes.hrz.uni-bielefeld.de /.mnt1/systems/386BSD/
hpcsos.col.hp.com /mirrors/.scsi5/386BSD/
isfs.kuis.kyoto-u.ac.jp /ftpmail/ftp.cs.titech.ac.jp/pub/os/386BSD/
isfs.kuis.kyoto-u.ac.jp /ftpmail/ftp.mei.co.jp/free/386BSD/
isfs.kuis.kyoto-u.ac.jp /ftpmail/ftp.mei.co.jp/mnt0/386BSD/
isfs.kuis.kyoto-u.ac.jp /ftpmail/ftp.mei.co.jp/mnt1/386BSD/
isfs.kuis.kyoto-u.ac.jp /ftpmail/ftp.mei.co.jp/public/386BSD/
jhunix.hcf.jhu.edu /pub/public_domain_software/386BSD/
kirk.bu.oz.au /pub/OS/386BSD/
mcsun.eu.net /packages/386BSD/
miki.cs.titech.ac.jp /pub/os/386BSD/
minnie.zdv.uni-mainz.de /pub0/pub/386BSD/
pdq.coe.montana.edu /pub/mirrors/386BSD/
plains.nodak.edu /pub/386BSD/
pprg.eece.unm.edu /pub/386BSD/
rs3.hrz.th-darmstadt.de /pub/os/386BSD/
sbcs.sunysb.edu /pub/386BSD/
sifon.cc.mcgill.ca /pub/packages/386BSD/
sune.stacken.kth.se /disk2/OS/386BSD/
1.hensa.ac.uk /pub/uunet/systems/1/386BSD/
von-neum.uni-muenster.de /incoming/386BSD/
walhalla.germany.eu.net /pub/comp/1/386BSD/
walton.maths.tcd.ie /src2/386BSD/
wnoc-fuk.wide.ad.jp /pub/386BSD/
The code may soon also to be available, or perhaps is already
available, from both CompuServe and BIX.
1.8.2 Official distribution sites
According to Lynne Jolitz, there is no such thing as an 'official'
386bsd site. The closest we have is 'agate.berkeley.edu' which is
mirrored at several of the sites listed above.
1.8.3 Reference sites
For a brief period, ref.tfs.com was available for use as a reference
system. This system was used as the test-bed for many programs that
were ported to 386bsd by many authors. Unfortunately, ref.tfs.com
has been disabled as a reference system. Once a replacement is
established, it will be noted here.
There is now a site in Germany that is acting as a reference site
for 386bsd. The name is "g386bsd.first.gmd.de", also known as
"bsd386.first.gmd.de". Sorry, no anonymous ftp yet. But there is
a "guest" login with the password "guest".
But the most important reason why I had installed the machine on
the network was for all these people who don't have enough space
to compile their own kernel or their own packages. They can do
it on this machine. ATS ( ats@first.gmd.de or ats@cs.tu-berlin.de )
Also, Montana State University has offered accounts on a 386BSD
machine to anyone who has a project they would like to do.
Send email to nate@bsd.coe.montana.edu with the name of your project
and have your account setup. As of this writing, the machine has
access to both NetBSD and 386BSD 0.1 + patchkit sources online. Here
is Nate's announcement.
This is to announce the availability of a machine on the network
available for anyone to do specific 386BSD/NetBSD projects.
Unfortunately, due to a not having a T1 network link, our connection
does not have the bandwidth to do the same job as 'ref' did.
However, this machine can be used by anyone who does not have the
resources to do projects on their own machine, or who does not have
a machine to do a project on it. In addition, I have local copies
of the interim release work and the NetBSD stuff (which are always
a little behind due to them both being done by hand).
Prerequisites for getting an account are simple:
1) telnet access so you can login - No modems are available, and you
wouldn't want to pay for long distance to Montana anyway :-)
2) a specific project to accomplish/attempt
3) a mail message sent to me stating your project and an account name.
The projects don't have to be overly specific, but since I can't
provide access to everyone, I need projects to give to the folks
who provided the resources to me a listing of the projects that
are being worked on.
The machine is a 486/33 with 16MB of memory and 3Gig of disk, some
local and some NFS mounted. The engineering Dept.. of Montana State
University has provided a large part of the resources this machine
has, and backups are being done on a regular basis.
Please send all requests for account to: nate@bsd.coe.montana.edu,
which is the machine that is being provided for the network access.
1.8.4 Unofficial archive sites that have neat stuff!
There are many sites that have things which have either been ported
to 386bsd or are available to the world. Use archie to find these
sites, or read comp.os.386bsd.* for more information.
agate.berkeley.edu:~/0.1-ports
agate.berkeley.edu:~/unofficial/from-ref
Listed here because they don't have access to 'archie' yet...
g386bsd.first.gmd.de -or- bsd386.first.gmd.de:
Sources for 386bsd0.1 and the later patchkits.
Source for NetBSD0.8 and the newer snapshots.
Xfree is installed binary as version 1.3.
Ported software are:
tcsh6.03.00
emacs19-15
gcc-2.4.5
top3-1
perl4.0.36
elvis1.7
bison-1.21
rn and nn.
In addition, ftp.cs.tu-berlin.de has a lot of neat
software and Wolfram Schneider (wosch@cs.tu-berlin.de) has
'ported' the FAQ into LaTeX. It is available in
pub/386BSD/FAQ/tex in both PostScript and DVI formats.
1.8.5 X for 386BSD 0.1 Ported Software List
This is a list of non-core X window system application that
have been ported to 386BSD 0.1. The ftp server and directory
name are listed above and each file or directory name is
followed by a short description. Feel free to send corrections,
additions or suggestions to rich@rice.edu.
agate.berkeley.edu:/pub/386BSD/0.1-ports/x-apps
InterViews C++ GUI class library + WYSIWYG document & graphics editors.
img_1.3 raster image manipulator/viewer
agate.berkeley.edu:/pub/386BSD/386bsd-0.1/unofficial/from-ref/public
Xw widget library
ghostscript-2.5.2 interactive postscript interpreter/viewer
ghostview-1.4.1 front end processor for viewing postscript
gnuplot-3.2 interactive graphics/plotting
gwm generic window manager with lisp interpreter
tk GUI tool kit with Tool command languate (tcl)
interpreter
ups C source level debugger with slick GUI
xbench X server performance measurement tool
xcdplayer GUI for cd player
xfig interactive graphical editor
xlock screen locker
xntpd network time protocol???
xphoon real-time view of lunar phase
xpool game of pool?
xroach yep, a roach crawling on your monitor.
xscreensaver screen blanker/saver
xv raster image viewer
xvgr ?
nova.cc.purdue.edu:/pub/386bsd/submissions
Xdtm-2.5.386bsd X desk top manager
idraw-bin.tar.Z C++ GUI class library + WYSIWYG document &
graphics editors.
img1.3.386bsd.tar.Z see above
mpeg_play.Z animated raster image viewer
small_X11r5.tZ a minimal subset of the core distribution
vogl.tar.Z a library that emulatates Silicon Graphics
GL calls
xview3 sun's GUI development tool kit
sunvis.rtpnc.epa.gov:/pub/386bsd/incoming:
Dirt.tar.Z GUI development tool kit
XBSD8514-0.1.Z 8514 X server port
XS3-0.3-exp.Z S3 X server port
acm.tar.Z aerial combat mission/flight simulator
chess-vort-movie.tar.Z ?
epoch.Z enhanced emacs for X
jpeg.tar.Z jpeg viewer
libXaw3d.a.Z 3D widget library
mpeg-1.2.tar.Z animated raster image viewer
ups-2.45.bin.tar.Z C source level debugger with slick GUI
vort-movie.tar.Z ?
xantfarm.tar.Z screen saver with ants?
xbench.tar.Z X server performance measurement tool
xpipeman.tar.Z game: connect pipes to keep a liquid within
xxgdb.tar.Z GUI for GNU source level debugger
--
TSgt Dave Burgess
NCOIC Applications Programming Branch
US Strategic Command, Offutt AFB, NE
burgessd@j64.stratcom.af.mil