Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!constellation!osuunx.ucc.okstate.edu!moe.ksu.ksu.edu!crcnis1.unl.edu!wupost!howland.reston.ans.net!europa.eng.gtefsd.com!uunet!psinntp!news.ge.com!combs!steve From: steve@combs (Stephen F. Combs) Newsgroups: comp.os.386bsd.questions Subject: FreeBSD sio.c question Date: 2 Nov 1993 20:59:28 GMT Organization: GE Drive Systems, Salem, VA Lines: 31 Message-ID: <2b6hng$cjp@alva.ge.com> NNTP-Posting-Host: 3.29.5.200 Summary: Configuring sio.c for DigiBoard Com4/8 dumb sio board X-Newsreader: TIN [version 1.2 PL2] Does anyone know if the FreeBSD sio.c supports the DigiBoard Com4/8 series of dumb serial I/O boards? If so, how to configure for same? My configuration is as follows: Board @ IRQ 7 (no lpt allowd ;->) Control Port @ 0x120 Com1 @ 0x100 Com2 @ 0x108 Com3 @ 0x110 Com4 @ 0x118 I've attemted to configure useing the "COM_BIDIR"/"COM_MULTIPORT" with no success (so far). I'm probably leaving something out of the config file (sigh) IF the boards are supported. If not, I'll take a stab at incorporating them (they're not bad boards, just dumb). E-Mail replies please to: CombsSF@Salem.GE.COM I'll summarize the results. ======================================================================= Stephen F. Combs GE Industry Sales & Services My Employer is in NO way GE Drive Systems Responsible or Liable for Network Services Any Opinions expressed by 1501 Roanoke Blvd. Myself. Salem, VA 24153 Internet E-Mail: CombsSF@Salem.GE.COM Novell via Internet: Combs-SF@Salem.GE.COM =======================================================================