Return to BSD News archive
Newsgroups: comp.os.386bsd.questions Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!elroy.jpl.nasa.gov!usc!howland.reston.ans.net!torn!mcshub!flex1!todd From: todd@flex.eng.mcmaster.ca (Todd Pfaff) Subject: zmodem rzsz and seyon Message-ID: <1993Oct26.162724.2496@mcshub.dcss.mcmaster.ca> Sender: usenet@mcshub.dcss.mcmaster.ca Nntp-Posting-Host: flex1.eng.mcmaster.ca Reply-To: todd@flex.eng.mcmaster.ca Organization: McMaster University Date: Tue, 26 Oct 1993 16:27:24 GMT Lines: 20 I'm using seyon under 386BSD-0.1+pk0.2.4 and Zmodem 3.18 for Linux (rzsz9202.tar.Z) to transfer files between my local PC and a remote Sun. Sending files from the Sun to the PC works fine, using sz on the Sun and the Zmodem autodetect feature of Seyon to initiate the transfer. Sending files from the PC to the Sun doesn't work. I see some output in the Seyon terminal window to the effect that I should start rz at the remote end, and I can see some modem traffic happening every once in a while but no progress is made. When I initiate a transfer from the PC within Seyon should it send the rz command to the remote Sun before starting sz on the local end, or do I have to manually run rz on the Sun end before starting the transfer? Or should I run sz outside of Seyon and direct it's output to the modem serial port device? --- Todd Pfaff \ Internet: todd@flex.eng.mcmaster.ca Dept. of Mechanical Engineering \ Voice: (905) 525-9140 x22902 McMaster University \ FAX: (905) 572-7944 Hamilton, Ontario, CANADA L8S 4L7 \