*BSD News Article 22415


Return to BSD News archive

Xref: sserve comp.os.386bsd.announce:137 comp.os.386bsd.questions:5957
Path: sserve!newshost.anu.edu.au!munnari.oz.au!constellation!aardvark.ucs.uoknor.edu!ns1.nodak.edu!netnews.nwnet.net!news.clark.edu!spool.mu.edu!howland.reston.ans.net!agate!agate!usenet
Newsgroups: comp.os.386bsd.announce,comp.os.386bsd.questions
Subject: 386BSD/NetBSD/FreeBSD Compatible tape drive list
Message-ID: <19815.9310141807@robinson.ecs.soton.ac.uk>
From: Bob Kemp <rsk@ecs.southampton.ac.uk>
Date: 14 Oct 1993 15:53:22 -0700
Sender: cgd@agate.berkeley.edu
Followup-To: poster
Organization: University of California, Berkeley
Approved: 386bsd-announce-request@agate.berkeley.edu
NNTP-Posting-Host: agate.berkeley.edu
Lines: 454

(Apologies for delay, Andrew seems to be still incommunicado.
 Send updates to me for the time being -- Bob)

*** NB: This list is now included in the {386,Net,Free}BSD FAQ
	maintained by Dave Burgess.

These tape drives have been reported as working (or not working)
on 386BSD, NetBSD or FreeBSD, either in articles on USENET or in
response to previous postings.  If you know any more details, want
to point out errors, know another tape drive that works (or doesn't),
have any suggestions for additions/changes to the FAQ, or anything
else useful, please send your reports to:

          rsk@ecs.soton.ac.uk (Bob Kemp)

PLEASE HELP TO UPDATE THIS LIST BY PROVIDING COMMENTS AND NEW
INFO.  IN RETURN, WE WILL POST UPDATES AND TRY TO MAKE THE LIST
AVAILABLE TO ANYONE INTERESTED.

IMPORTANT DISCLAIMER:
        This list is not guaranteed to be 100% correct.
        We don't know much about tape drives as yet, so
        we are only collating information provided by others.
        By getting feedback on this list, we hope to improve
        it into an FAQ.

EVEN MORE IMPORTANT THANK-YOU:
        Thanks to everyone who's contributed to this list. Without
        your help, it wouldn't exist!

-------------------------------------------------------------------
Additions:
	Archive 2150L

Minor Corrections to:
	Archive 2525-S

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

MANUFACTURER CONTACTS:
        Archive is a Maynard company bought by Conner
                Sales:     +1 714 641 0279
                Technical: +1 800 227 6296
        [informant: mq8qc@qcunix.acc.qc.edu (KARAGEORGIOU ANGELOS)]

-------------------------------------------------------------------

COMPATIBLE TAPE DRIVES:

Format of each entry is as follows:
Name:           {name of the device; if you're reporting, please be as
                 specific as possible}
Capacity:       {Maximum size of the device}
Approx Cost:    {Roughly what you paid}
Interface:      {How it talks to the machine - SCSI, PC bus, etc}
Controllers:    {What controller you're using - Adaptec 1542B, etc}
Informant:      {Who says it works}
Comments:       {Anything good or bad you feel like saying}


Name:           Archive 2060
Capacity:       60MB
Approx Cost:    US$200
Interface:      SCSI
Controllers:    Adaptec 1542b, Adaptec 1742a
Informant:      duncan@zycad.com
Comments:       no observed problems when used with julian's drivers.
                works fine with 1542b/1742a


Name:           Archive 2150
Capacity:       250Mb
Approx cost:    US$350-500
Interface:      SCSI
Controllers:    Adaptec 1542b, Adaptec 1742a
Informant:      ejh@slustl.slu.edu (Eric J. Haug)
                admerlev@cip.e-technik.uni-erlangen.de (me 8-))
                duncan@zycad.com
                jfieber@sophia.smith.edu
Comments:       works well with both the driver in the distribution
                kernel and julians' SCSI drivers.   [ejh]

                nice device!!!, works like a charm, tar w/ original
                scsi-driver plus variable block length patch, under DOS:
                GTAR, ASPIBIN (ASPI-TAR), PCTOOLS 8.0, COREL-SCSI
                works fine with julian's drivers and 1542b/1742a
                    [admerlev/duncan]
                and with Adaptec 1542C + Julian's SCSI drivers [jfieber]


Name:           Archive 2150L
Capacity:       150 Mb, 120 Mb
Interface:      QIC-02
Controllers:    Archive Viper SC402
Informant:      vak@kiae.su (Serge Vakulenko)
Comments:       Works well, with new wt driver (by me and Sergey Ryzhkov).
		Supports 150Mb and 120 Mb formats on write and 150Mb, 120Mb
		and 60Mb formats on read.  It's possible to use mt command
		to rewind the tape, seek file forward etc.


Name:           Archive 2525-S (Firmware Rev. 25462-007 - seems to be important [nbladt])
Capacity:       QIC-24 (?), QIC-120, QIC-150, QIC-525
Approx Cost:    ca. 1000,- DM (about US$ 600 ?)
Interface:      SCSI-1
Controllers:    Adaptec 1542B, Adaptec 1542C, Adaptec 1742A, Adaptec 1742B
Informant:      nbladt@autelca.ascom.ch (Norbert Bladt)
                hm@hcshh.hcs.de (Hellmuth Michaelis)
                loodvrij%cyb@fredbox.cts.com (Bruce J. Keeler)
Comments:       In contrary to what my dealer told me, it can read and WRITE
                QIC-150 tapes. Didn't have a chance to try QIC-120, or QIC-60,
                etc. yet.
                I am using 386bsd-0.1 (still with the first patchkit and
                all updates from Julian for his fabulous SCSI-driver kit)
                Sorry, no experience with the original driver because
                that driver doesn't work with the 1742A. [nbladt]

                Worked with Julian's driver out of the box. [hm]

		Since putting in Julian's drivers, with Dave Tweten's mods,
		it seems to work just fine.  [loodvrij]


Name:           Cipher Model 540
Capacity:       45M/60M (probably/hopefully)
Approx Cost:    Loaned to me in `vintage appearance' (Much dust) - No idea !
Interface:      SCSI 1
Controllers:    Adaptec 1542B
Informant:      Julian Stacey   <stacey@guug.de>
Comments:       Shows promise, Cant yet call it truly usefull though:
                The Good Bit:
                        I have seen it stream constantly on 386bsd.
                The Bad Bit:
                        I can't use it as a usefull drive because it keeps
                        dropping out with errors.
                        The fault does not lie in the media, & most probably
                        not with external power supply or scsi cable -
                        I'm working on it.


Name:           CIPHER MicroStreamer F880 (1600bpi, 9 track PERTEC interface)
Capacity:       ???
Approx Cost:    $5000 for the drive in 1985
                $1000 for protocol Converter 1992
Interface:      SCSI
Controllers:    Adaptec AHA-1542A to NCR ADP-53 to tape drive 
Informant:      mike@scrooge.uoregon.edu (Mike Hoffman)
Comments:       It is FAST, reads tape about the same speed as rewind.
                The SCSI controller runs the 9 track drive thru the
                converter and an Archive 2060S 60mb Cartridge tape
                drive directly.  After putting in the current
                patches and reading the PERTEC Specs it was almost
                "plug and play".  The ADP-53 is a protocol converter
                from/to SCSI/PERTEC, purchased from Laguna Data
                Systems (see Byte Magazine).

                Problems:
                mt does not seem to be of much use.  Forward spacing
                the 9 track tape is an iffy job (skipping the label
                on a labeled tape).  dd now does this (skip=1).

                I always get the error 'cannot prevent/allow'.  This
                is not a big deal (prevent or allow removal of
                tape).

                dd does not handle cr/lf at all well.  Could be all
                the protocol conversions or gnu dd just doesn't do
                it.  All files are read in as one line(no CR Lf
                etc).  The blocking and conversion options have no
                effect on line length.  Conversion from EBCDIC to
                ASCII works fine.  A small program to break up the
                file solves the long line problem.


Name:           Cipher ST-150F
Capacity:       150Mb
Approx cost:    US$300 (incl. interface)
Interface:      QIC-02
Controllers:    Cipher
Informant:      hideki@isl.rdc.toshiba.co.jp (YOSHIDA Hideki)
Comments:       works well with blocksize <= 4b


Name:           Cipher ST150-S
Capacity:       QIC-24(read only), QIC-120, QIC-150
Approx Cost:    1300,- DM (long ago ..)
Interface:      SCSI (better SCSI-I or CCS)
Controllers:    Adaptec 1542B, 1742
Informant:      Hellmuth Michaelis (hm@hcshh.hcs.de)
Comments:       This drive responds with empty strings if asked for
                for it's vendors name and model.
                It has a strange format of the mode sense/set command
                blocks.
                By default, it reports a soft error back to the host
                which makes it a bit hard to work with.
                Problems solved with next release of Julian Elischer's
                enhanced SCSI driver (currently beta, July '93).
                Someone from Australia reported that there is an upgrade
                to SCSI-2 available, but since Cipher was sold to Archive
                who was sold to Maynard who was sold to Conner, I could not
                verify this.


Name:           COMTEK Gigatape 1200 4mm external DAT
Capacity:       1.2 Gb
Approx Cost:    US$800
Interface:      SCSI 1
Controllers:    Adaptec 1542B
Informant:      Rich@rice.edu
Comments:       Uses formatted, fixed blocksize tapes.  Only
                partial success writing  about 400Mb so far.


Name:           DEC TZ30
Capacity:       96 MB (uses 3M CompacTape cartridges)
Approx cost:
Interface:      SCSI
Controllers:    Adaptec 154xB
Informant:      davidb@otto.bf.rmit.oz.au (David Burren) May 1993
Comments:       Works with Julian's SCSI drivers.  Console reports "cannot
                prevent/allow" but this is not a problem.
                This is the native-SCSI half-height version of DEC's
                TK50Z drive.


Name:           DEC TZ857
Capacity:       18.2 GB (stacker unit with seven 2.6 GB CompacTape
                    III tapes)
Approx cost:    lots
Interface:      SCSI
Controllers:    Adaptec 154xB
Informant:      davidb@otto.bf.rmit.oz.au (David Burren) May 1993
Comments:       Works with Julian's SCSI drivers.  As with the TZ30,
                "cannot prevent/allow" is reported but operation
                continues.
                As 386bsd has no "mt online" yet, cartridge loading is
                done manually, but unloading/advancing is done through
                "mt offline" as under Ultrix.
                I don't really use this drive, but I had access to it
                for a day and tried it out...


Name:           Exabyte 8200 8mm
Capacity:       2.2 GB
Approx cost:
Interface:      SCSI
Controllers:    Adaptec 154xB
Informant:      davidb@otto.bf.rmit.oz.au (David Burren) May 1993
Comments:       Works perfectly with Julian's SCSI drivers.
                I use it all the time for my system dumps and for
                exchanging files with other machines.


Name:           Hewlett-Packard HP35480A DAT drive
Capacity:       4 GB
Approx Cost:    $1400
Interface:      SCSI
Controllers:    Adaptec 1542B
Informant:      karl@neosoft.com
Comments:       Great drive, flawless performance.  Requires
                variable length tapedrive patches which should be
                in the patchkit, but I haven't checked.  (They were
                submitted around November of '92)


Name:           Sankyo ST525
Capacity:       525 Mbyte
Approx Cost:    6000 SEK (US$850)
Interface:      SCSI (SCSI-2)
Controllers:    Adaptec 1542B
Informant:      jonas@carmen.volvo.se (Jonas Lagerblad)
Comments:       everything works allright except for one crash
                The SCSI bus seemed hang after running
                "dump 0uf - /dev/rsd0a | gzip --best |
                    dd of=/dev/rst0 bs=64k"
                for approx 1 hour. If I skip the compression
                everything works perfectly. (I am using Julian's
                SCSI driver) 386BSD-0.1 patchkit 0.2 patches 0-110


Name:           Tandberg 3600 series
Capacity:
Approx cost:
Interface:
Controllers:
Informant:      fredriks@austin.ibm.com (Lars Fredriksen)
Comments:       IN DEVELOPMENT.  So far I have it working with fixed
                and variable block micro code (original Tandberg vs. IBM firmware).

                I am adding support for selecting densities for the minor
                devices via IOCTLS,as well as setting the fixed blocksize via
                IOCTL. This work is almost done, and I will send the driver to
                julian. I see him as the distributor of fixes to his own code.

                So far I have not had any problems reading 30/60/150/250 Mb tapes.
                similarly no problems writing 150/250 Mb tapes.


Name:           Tandberg 3660
Capacity:       250Mb
Approx cost:
Interface:
Controllers:
Informant:      Per Anders Olausson <pao@cd.chalmers.se>
                meidinge@ps2zenger1.informatik.tu-muenchen.de(Thomas Meidinger)
Comments:       DC6250, DC6150 (not tested) and DC600A.
                Reads and writes DC-6120 as well. [pao]


Name:           Tandberg 3820 5 1/4" HH internal QIC 525 SCSI streamer
Capacity:       up to 520Mb (depending on media) uncompressed
Approx cost:    (I bought mine two years ago--it wasn't cheap :-)
Interface:      SCSI-1/2
Controllers:    AHA1542B, 1742A, DTC3290
Informant:      tmh@first.gmd.de (Thomas M. Hoberg)
                stacey@guug.de (Julian Stacey)
                tomb@gator.bocaraton.ibm.com (Thomas Bagli)
Comments:       Works well with both the driver in the distribution kernel
                and julians' SCSI drivers. Reads all QIC media (tested
                QIC 40/60/120/150/525) Writes QIC 120/150/250/320/525
                (120/150/525 tested) Includes a 256k buffer. 2 rw
                speeds: 83k/s for QIC<320, 200k/sec for 320+
                Occasionally the file system can't keep up at
                200k/sec on backups (small files), somewhat more often
                on restores. The drive can directly seek to any block
                on the tape, so in theory at least with the
                appropriate device drive you could mount a file system
                on it (you better keep fragmentation low :-) As you
                can guess, I am EXTREMELY happy with it.
                [tmh]

                The Good Bit:
                It streams constantly without error (~40mins for 525M
                write @ 60K blocking).  Tape drive shares bus with 3
                SCSI-2 Seagate drives also OK with a SCSI-1 Micropolis 1684-7.
                The Bad Bit:
                We (several us of using these TDC3820s on different hardware)
                have undergone an eerom + eprom autodensity upgrade to allow
                150M writes (previously could only read 150M tapes +r&w 525M);
                this known as Revision 04908, Done 92 08 28.
                There is some kind of block size problem that prevents
                us reliably exchanging 525M tapes, 150M seems OK,
                problem is tape hardware oriented I believe,
                not 386BSD specific.
                Problem pre-existed the 150M write capability upgrade.
                A friend with same 386bsd + TDC3820 + 1542A can't read my tapes,
                neither can a PCS (M68000 based) computer with a TDC3820
                [stacey]

                We paid DM1000 (~$625) in early 1991.  This was a very
                special price, and I estimate that the actual cost would be
                (very) approximately 50% more (~$950).
                I've used it with an Adaptec 1742A, a DTC3290 (caching 1542B
                emulation), and a Mylex ?376? (caching, but only under DOS)
                SCSI controllers.  It doesn't just stream, it screams.  I've
                never seen a streamer that just streams without a pause,
                rewind or such.  This one does (not to say that the Tandberg
                is the sole reason for this).
                [tomb]

Name:           WangDAT 3200
Capacity:       2Gb (up to 8Gb w/compression) on a 90 meter tape
Approx cost:    US$1200-$1300 approx
Interface:      SCSI
Controllers:
Informant:      conklin@talisman.kaleida.com (J.T. Conklin)
                cgd@postgres.Berkeley.edu
Comments:       Works great with Julian's SCSI drivers and an Adaptec 1742...
                (I use it to do my dumps, and I've actually checked and made
                sure the restores work...  8-) [cgd]



Name:           Wangtek 5099EN
Capacity:
Approx cost:
Interface:
Controllers:
Informant:      Original 386bsd.FAQ
Comments:


Name:           Wangtek 5099SC24, this is a QIC drive (same mechanical drive
                as 5099EN24) with a QIC24 to SCSI board by wangtek full height
Capacity:       60Mb w/DC600A, 100Mb w/DC6250
Approx cost:    Used as is drives US$25.00/each, refurbs ~US$100.00
Interface:      SCSI
Controllers:    Adaptec 1542B
Informant:      rgrimes@agora.rain.com
Comments:       works well with both the driver in the distribution
                kernel and julians' SCSI drivers.  Very old full height
                driver readily availiable in the surplus market.  I know
                where there are 50 or so of these for $25.00/each as is,
                they are pulls from old workstations.


Name:           Wangtek 5150EQ
Capacity:       250MB (QIC-150)
Approx cost:    400 UK pounds including software for DOS
Interface:      QIC-02
Controllers:    Wangtek QIC-02 included
Informant:      kd@doc.ic.ac.uk (K J Dryllerakis)
Comments:       Works with stock driver. Very very slow but reliable. Funny,
                it only seems to work if you use /dev/wt0 instead of /dev/rwt0.
                New driver in beta version by micke@dynas.se (Mikael Hybsch).



Name:           Wangtek 5150ES
Capacity:       250Mb
Approx cost:
Interface:      SCSI
Controllers:    Adaptec 1542B
Informant:      berry@max.IN-Berlin.DE (Stefan Behrens)
                duncan@zycad.com (Don)
Comments:       [With original 0.1 SCSI ...] it streams constantly
                and works without any errors.  Works with original
                as.c driver and with newer drivers from Julian
                [eg in patchkit 0.2.4].  [berry]

                Does not work with the 1742a and 386bsd!!!!!
                SCSI driver compatibility problems.  [duncan, ~Jun'93]

                NOTE: with the latest patchkit Stefan Behrens [berry]
                has reported that Julian's SCSI now works with it.

                No update yet on 1742A behaviour.



Name:           Wangtek 5525ES
Capacity:       525M
Approx cost:    US$600, CDN$1000
Interface:      Adaptec 1542B, Adaptec 1742
Controllers:    SCSI
Informant:      bky@eco.twg.com (Brian Yasaki)
                andrew@noware.ocunix.on.ca (Andrew Cornwall)
Comments:       Writes QIC120, 150, 250, 525. Reads QIC24 as well
                (untested). Works with the distribution kernel.


Name:           Wangtek QT60 (aka Tecmar QT60)
Capacity:       60M
Approx cost:
Interface:      QIC 02
Informant:      tcombs@pacific.urbana.mcd.mot.com (Tim Combs)
Comments:       It works although does not stream under 386BSD 0.1

END OF COMPATIBLE TAPE DRIVE LIST


--
Please send submissions for comp.os.386bsd.announce to:
					386bsd-announce@agate.berkeley.edu