*BSD News Article 20065


Return to BSD News archive

Xref: sserve comp.os.386bsd.announce:95 comp.answers:1729 news.answers:11450
Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!elroy.jpl.nasa.gov!swrinde!cs.utexas.edu!natinst.com!hrd769.brooks.af.mil!hrd769.brooks.af.mil!not-for-mail
From: burgess@brooks.af.mil (Dave Burgess)
Newsgroups: comp.os.386bsd.announce,comp.answers,news.answers
Subject: comp.os.386bsd.announce Frequently Asked Questions (Part 4 of 9)
Followup-To: comp.os.386bsd.announce
Date: 26 Aug 1993 15:20:09 -0000
Organization: Armstrong Laboratory, Brooks AFB, TX
Lines: 301
Sender: burgess@hrd769.brooks.af.mil
Approved: news-answers-request@MIT.Edu
Distribution: world
Expires: 09/13/93
Message-ID: <386bsd-faq-4-746378397@brooks.af.mil>
References: <386bsd-faq-1-746378397@brooks.af.mil>
Reply-To: 386bsd-faq@brooks.af.mil (386bsd FAQ Maintainer)
NNTP-Posting-Host: hrd769.brooks.af.mil

Posted-By: auto-faq 2.4
Archive-name: 386bsd-faq/part4

Section 4.	(Kernel Additions)

  Thanks go to  Marc Wandschneider (storm@cs.mcgill.ca) for putting this
  section of the FAQ together..

4.0	Introduction

	If you have written some addition to the kernel, or know of
	one that feel should be mentioned, send mail to Dave Burgess 
	(burgess@hrd769.brooks.af.mil) with all the relevant information, 
	and it will be added for the next release.



4.1	Common Kernel-related problems

4.1.1	Where are the commands "rpcinfo" and "rpcgen"?

	Chris Flatters (cflatter@nrao.edu) informs us in the following
	posting excerpt where we can find them:

	--------------------------------------------------------------------
	The sources for the Sun OS 4.0 RPC are on titan.rice.edu (I don't 
	have the inet number handy) in directory sun-sources.  You will have 
	to pick up all the shell archives and unpack them to get at rpcgen.
	--------------------------------------------------------------------

	These sources are also included in NetBSD and FreeBSD as part of the
	normal installation.
 
4.1.2	Where can I get a working "netstat"?

	netstat was released as a binary patch and source patch 
	in the patchkit.  Netstat will be a part of the FreeBSD 
	distribution currently under construction, and is already
	part of NetBSD.


4.1.3	How can I fix NFS to work with my NE2000 board?

	Ken Raeburn (raeburn@cambridge.cygnus.com) has both identified the
	problem and provided us with a work around:

	--------------------------------------------------------------------
	I reported previously that I was seeing problems reading files over
	NFS using the ne2000 driver; timeouts would eventually be reported, no
	data would be read.  Listing files and directories (small ones
	anyways) were not a problem.

	After playing with etherfind and kernel printfs, I've come to this
	conclusion: Fragmented 8K UDP packets from the NFS server are not
	reaching the UDP layer in 386bsd.  The Sun is sending them (according
	to another Sun spying on the network), but the UDP input routine is
	never called.  I don't know if the bug here is on the 386bsd or Sun
	side, and won't have time to look into it in the next couple of days.

	In the meantime, mounting NFS file systems with "rsize=1024" does get
	rid of this problem.

	(It does nothing about TCP being slow, though.)
	Ken
	--------------------------------------------------------------------

	Hopefully, the real solution (a UDP fix) will be forthcoming so
	that the slow TCP problem is fixed as well.

	See also:  Section 2.6.3.3c "I am getting lousy performance 
		   out of my network card.  What are some of the other 
		   possibilities?"

4.1.4	How can I get "ps" and "w" to work?

	The patch-kit contains a fix for /src/lib/libutil/kvm.c, which,
	last we heard, was due to the work of Jim Paradis 
	(paradis@sousa.ltn.dec.com).  New versions of the kernel should
	have this problem fixed.

	In order for users to be able to use certain flags with ps and
	the w/uptime commands, the kernel must have permissions 755.

	Also, in order to save space on the distribution, the kernel is 
	'stripped' of all its labels.  Programs that rely on those labels
	will not work.  There are several in this category, including ps, 
	w, and uptime.  Either ftp an un-stripped kernel, or recompile.


4.1.5	Where are re_comp and re_exec?

	These two functions are currently not in libc.a.  However, there
	are two related functions that seem to work exactly the same in
	all cases we've heard of---These are regcomp() and regexec().

	Thus, a pretty ugly fix for the problem would be to always compile
	as follows:

	$(CC) -Dre_comp=regcomp -Dre_exec=regexec ....

	There is a slightly nicer fix available for this, listed in 4.2


4.1.6	Where are stty() and gtty()?

	These functions are missing from libc.a.  To fix, add the following
	#defines to your program:

	#define stty(f, m)	ioctl((f), TIOCSETP, (m))
	#define gtty(f, m)	ioctl((f), TIOCGETP, (m))

	A more elegant solution is to apply the patchkit.  These routines
	are included in there.

4.1.7	The system hangs with the HD light on after intense disk usage.

	Brett Lymn (blymn@mulga.awadi.com.AU)  Provides us with a
	description of the problem and the steps that he had to take
	to fix it:

        It seems that, on some disk subsystems, the controller and the
	hard disk get out of synchronization when they are being used 
	intensively.  The result of this is that the disk completes a 
	command but the controller still believes the disk not to have 
	completed the command, so the controller status register 
	indicates the disk is busy when it is not really.  The standard 
	wd drivers are too trusting of the hardware and expect it to do 
	the right thing all the time.  There are a few while loops in 
	the wd drivers that loop on a status change from the disk 
	controller, however; if the problem I have described takes place 
	then the wd driver will be stuck looping waiting for the disk to 
	not be busy - which never happens, so you lock the machine because 
	this is a kernel level wait.  To fix this problem I put a timeout 
	into the while loops so that after a specified time the wd driver 
	will give up waiting for the drive to become ready, reset the 
	controller and retry the command.  In my experience the retry 
	always succeeds.

	Ed.Note:  The retry doesn't ALWAYS work, but it IS better than 
	just waiting for the drive to wake back up (which it never does).


4.1.8	How do you implement quotas on Net/2 derived BSD systems?

	From: tinguely@plains.NoDak.edu (Mark Tinguely)

 	maybe you did not complete the setup, here is a step-by-step 
 	instructions to get them to work:

	1)  make a kernel with quota option installed

	2)  edit /etc/fstab and include the kinds of quotas you want, 
	    below I used "userquota", you could also add "groupquota".

	/dev/wd0h		/usr		ufs	rw,userquota 1 2

	3)  for each filesystem that is in /etc/fstab that uses quota,
	    create the file "quota.user" (and "quota.group if appropriate).
	    Above I have user quotas in the /usr filesystem, so I would:

	    # touch /usr/quota.user

	4)  scan filesystem for files ownership (and/or group ownership).

	    # quotacheck -a

	5)  now you can add individual quota limits, if you want to add 
	    the same quotas to the many people, then make a template and 
	    replicate the template.  If they change for each user, then 
	    edit seperately.

	    # edquota tinguely

	 (an editor is kicked up and says something like:

	Quotas for user tinguely:
	  /usr: blocks in use: 11876, limits (soft = 0, hard = 0)
	        inodes in use: 891, limits (soft = 0, hard = 0)

	 a limit of 0 means "unlimited".  Change these to the appropriate 
	 number of blocks.  A soft limit generates a warning, and can be 
	 exceed for period of time (7 days?), after which time a soft limit 
	 is treated like a hard limit.  A hard limit denies new writes.

 	to replicate a template (for this example let us assume "tinguely" 
 	is the template):

	    # edquota -p tinguely user1 user2 user3 ... userN

	6)  turn quotas on (usually done in the /etc/rc file, but turn it 
	    on manually so you do not have to reboot right now:

	    # quotaon

	that should take care of setting up quotas.  You can look at the 
	status of use of files with repquota, the -a option lists all 
	filesystems with quotas.


4.2	Available kernel add-ons


4.2.1	The Patch-Kit

	Perhaps the most famous of all additions to the kernel, the Patch-Kit,
	currently coordinated by Rodney Grimes (rgrimes@agora.rain.com)
	contains numerous bug fixes, Julian's SCSI drivers, as well as fixes
	for other parts of the system.

	The patch-kit, as well as all relevant information, is available on
	agate.berkeley.edu (and mirrors) in unofficial/patch-kit, as well
	as bsd.co.montana.edu in /pub/patch-kit. (archie will likely list
	other sites as well)

	It is highly recommended that all users with space for the source code
	apply the patch-kits as many things that seem broken in 0.1 suddenly
	start working with the patch-kits.

4.2.2	Shared Libraries

	A basic and experimental implementation of shared libraries exists
	for 386bsd.  According to the author (Dr. Joerg Lohse, 
	lohse@tech7.informatik.uni-hamburg.de), features are as follows:

	-No kernel extension is necessary
	-Shared libraries use the approach used in SysV.

	Others are also working on different implementations of shared
	libraries.

	This code can be obtained from agate.berkeley.edu in 
	~/unofficial/from-ref/sys.extras.  The file is called ??????????.

	Bill and Lynne have adopted a shared-library implementation based
	on Dr. Lohse's original work.  It will be included in Version 0.2
	of 386bsd and should be included in NetBSD about the same time 
	(Yes, I am guessing here).

4.2.3	Sound Blaster Drivers

	A driver for the Sound Blaster card has been written by Steve
	Haehnichen (steveh@ucsd.edu) for BSD.  Steve Greakines has
	provided us with the information necessary to get this driver 
	working under 386bsd.

	Most features of the SB family of cards are supported save some
	stereo portions of the SBPro cards.

	The driver is available on agate.berkeley.edu in 
	unofficial/drivers/misc/soundblaster-1.4


4.2.4	Bus Mouse Drivers

	Fred Cawthorne (fcawth@delphi.umd.edu) has written a busmouse
	driver for 386bsd.  It supposedly works with X386, and the
	last version we have checked out was labelled as a BETA 
	release.

	This can be found on agate in unofficial/drivers/misc/busmouse
	
4.2.5	PPP Support

	A package to add PPP support to 386bsd can be found on agate
	in unofficial/drivers/net


4.2.6	re_comp and re_exec library functions

	As mentioned in section 4.1, re_comp and related functions, such
	as re_exec, are currently not in the library libc.a  Apart from
	using the rather crude fix listed above, there is another option.

	Kim Anderson (kim@dde.dk) has provided a patch that will add these
	to libc.a.  You can probably obtain this patch from the author, or
	you can ftp it from binkley.cs.mcgill.ca in pub/386bsd.

4.2.7	Intel i82586 Ethernet Controller driver

	Garrett A. Wollman has written a driver for the Intel i83586 
	Ethernet Controller.  The driver is available from agate
	in unofficial/from-ref/sys.extras.

	The authors e-mail address is listed as Garrett.Wollman@uvm.edu,
	attempts to send him mail there have failed.

4.2.8	PC Speaker driver for Nethack

	Andrew A. Chernov has ported the Nethack PC Speaker driver to
	386bsd.  It allows the speaker to be controlled by applications.

	Unfortunately, we are not aware of a site that distributes this,
	but this patch has been posted a couple of times to the various
	comp.os.386bsd groups, and the author can be contacted at
	ache@astral.msk.su

-- 
------
TSgt Dave Burgess
NCOIC AL/Management Information Systems Office
Brooks AFB, TX