Return to BSD News archive
Newsgroups: comp.os.386bsd.questions Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!elroy.jpl.nasa.gov!swrinde!network.ucsd.edu!news.cerf.net!benton.prepress.com!nuntius From: Bob Costa <costa@benton.prepress.com> Subject: Re: how to use USRobotics Internel 14.4 modem (Sporster) Message-ID: <1993Aug9.195611.18255@prepress.com> Sender: usenet@prepress.com (Usenet login) Nntp-Posting-Host: costa.prepress.com Organization: Prepress Technologies X-Useragent: Nuntius v1.1b2 References: <240smf$bme@acsc.com> Date: Mon, 9 Aug 1993 19:56:11 GMT Lines: 22 Are you not even able to get TIP to work? I too am having problems with the internal sportster. Everything works great as long as i'm using TIP. But SLIP is a different story! I know everything in the software is configured correctly because I have an older 2400 baud modem which is working just fine with SLIP. The USRobotics is doing something and i'm not quite sure what! I noticed in an earlier post: >the problem that you might be having is two fold: > >a) slattach drops the line >b) XON/XOFF may be turned on your modem > >Try also slattach with no header compression I tried turing everything off &D0 &A0 &... etc etc but still no luck... Any suggestions would be very greatly appreciated!