Return to BSD News archive
Received: by minnie.vk1xwt.ampr.org with NNTP id AA1569 ; Tue, 23 Feb 93 14:48:54 EST Path: sserve!manuel.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!agate!doc.ic.ac.uk!pipex!seunet!sunic!mcsun!sun4nl!foxim!rvh From: rvh@foxim.nl (Roland van Hout) Newsgroups: comp.unix.bsd Subject: Re: Help configuring uucp Message-ID: <1736@foxim.nl> Date: 18 Feb 93 17:15:49 GMT References: <C2K9B4.7F1@uceng.uc.edu> Organization: Foxim Software, Capelle a/d IJssel, Netherlands Lines: 19 >From article <C2K9B4.7F1@uceng.uc.edu>, by calee@uceng.uc.edu (Christopher Lee): > > I have figured out how to get the /dev/com port to work with a modem > and I can dial out to another system just fine. However, I can't > to get any kind of UUCP link up between two systems. Shouldn't there > be a uucico program or is that in a patch? Also, are there any news The uucico program is in /usr/libexec/uucp and some others for uucp are there also. The other uucp utils are in /usr/bin. In /etc/uucp you have to configure your uucp with the files port/sys/dial/config. > readers ported to 386BSD yet? Yes I compiled vn and tin but I use vn mainly. If you want more info drop me a line. -- Roland van Hout, software engineer at Foxim Software, Capelle a/d IJssel, Netherlands, tel: 010-4588211, fax: 010-4518690, Internet: rvh@foxim.nl ARPA: ...!uunet!mcsun!sun4nl!foxim!rvh