Return to BSD News archive
Received: by minnie.vk1xwt.ampr.org with NNTP id AA1452 ; Tue, 23 Feb 93 14:42:19 EST Newsgroups: comp.unix.bsd Path: sserve!manuel.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!agate!howland.reston.ans.net!gatech!destroyer!cs.ubc.ca!uw-beaver!newsfeed.rice.edu!rice!news.Rice.edu!rich From: rich@Rice.edu (Richard Murphey) Subject: Re: 386BSD scsi problem In-Reply-To: azell@jcn.w.open.de's message of Tue, 16 Feb 1993 22:06:10 GMT Message-ID: <RICH.93Feb17110839@omicron.Rice.edu> Sender: news@rice.edu (News) Reply-To: Rich@Rice.edu Organization: Department of Electrical and Computer Engineering, Rice University References: <1993Feb16.220610.274@jcn.w.open.de> Date: Wed, 17 Feb 1993 17:08:39 GMT Lines: 13 In article <1993Feb16.220610.274@jcn.w.open.de> azell@jcn.w.open.de (Andreas Zell) writes: Hi, if i try to boot the dist.fs floppy from 386BSD, i got the following message: as0b: controller error 0x16 reading fsbn0 scsi sense: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 as0b: controller error 0x16 reading fsbn0 scsi sense: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Try enabling the BIOS on your scsi adapter. At least on the Adaptek 1542B this will initialize the card and attached disks and avoid some of these errors on cold boot. Rich